Striker8881
New Member
- Joined
- Jul 10, 2012
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Age
- 33
- Location
- Perth
- Members Ride
- VY SS Commodore LS1 M6
hey guys, new to this forum
i purchased my VY SS back in 09 where it was an managers car of a holden car dealer
it had mainly freeway driving so eventually decided to grab it
drove it for a year and a bit and decided to change a few things
put a GTS pipe on for a little more
made a cheap 2.5' exhaust for a note... HSV extractors, 2.5' xforce exhaust with a custom rear section (after rear ender)
then decided too fit some HID's to the mix, low beam and high beam
then a few months ago the slave cylinder died so it was time for a new clutch which i purchased from NPC
i then lowered the car with a set of Konig Yellows on the front, and a sat of Konig Reds on the rear, mixed with a set of Lovell springs to drop it just a little
and then the power bug hit again
after talking to a mate we decided a motor shall be built
a 383 stroker should make it go that little bit better...
so parts are slowly arriving and soon shall be assembled
definately cant wait to see get this thing going
(Photos not in any order)
i purchased my VY SS back in 09 where it was an managers car of a holden car dealer
it had mainly freeway driving so eventually decided to grab it
drove it for a year and a bit and decided to change a few things
put a GTS pipe on for a little more
made a cheap 2.5' exhaust for a note... HSV extractors, 2.5' xforce exhaust with a custom rear section (after rear ender)
then decided too fit some HID's to the mix, low beam and high beam
then a few months ago the slave cylinder died so it was time for a new clutch which i purchased from NPC
i then lowered the car with a set of Konig Yellows on the front, and a sat of Konig Reds on the rear, mixed with a set of Lovell springs to drop it just a little
and then the power bug hit again
after talking to a mate we decided a motor shall be built
a 383 stroker should make it go that little bit better...
so parts are slowly arriving and soon shall be assembled
definately cant wait to see get this thing going
(Photos not in any order)