Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

change cam sensor

Discussion in 'VT - VX Holden Commodore (1997 - 2002)' started by 94calais, Dec 11, 2010.

  1. 94calais

    94calais New Member

    Messages:
    104
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 21, 2008
    Location:
    ipswich qld
    Members Ride:
    03 5.7 vy ss
    hey guys, was told need to change the cam sensor, just wonderin can anyone tell me how to change it and where it is and looks like, any help on this would be muchly appreciatted, cheers
    oh it's a vt v6
     
  2. Krisp

    Krisp New Member

    Messages:
    539
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    Dec 6, 2010
    Location:
    perth
    Members Ride:
    D22 St-r Navara
    its held on with one screw on the timing cover above the crank seal. then just use a flat head driver to pry it out lightly
     
  3. 94calais

    94calais New Member

    Messages:
    104
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 21, 2008
    Location:
    ipswich qld
    Members Ride:
    03 5.7 vy ss
    do i take the pulley off the water pump to get to it
     
  4. Room42

    Room42 New Member

    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Nov 7, 2009
    Location:
    hobart
    Members Ride:
    vr acclaim series 2
    There is a magnet in the timing gear that you change as well but you need to pull off the timing cover for that. Dont wreck your sump gasket when you put the timing cover back on!
     

Share This Page