Hi just wondering I have a 07 crewman I want to swap the hoodlining and plastics from an ss crewman. Ss has lights in the plastics and the interior light is at the front instead of centre. Could anyone tell me would mine have the wiring to accommodate
It’s slightly different. Theres a loom that comes up the b-pillar. That has a sub loom. The sub loom in yours is a four wire I think. It goes to the centre roof light. SS sub loom has 5 wires (off the top of my head). It goes across the roof lining and is hot glued or taped onto it. It branches out to the rear lights and to the front.
You MUST source the correct screws for the sunnies holder. They are extra short. Regular screws are going to go into (or through) roof sheet and fk your day right up.
The mounts are there.
The sub harness can be plugged in.
The sunnies holder may need some mods to the wiring to work off your available wiring harness. I had to mod mine.
I used LED’s in the map lights, rear door lights etc.
The cutout should be marked on the back of the headlining you have. I filled in the centre hole with card board and tape. Recovered.
I have two threads showing how.