Replacing Faulty ABS Module

[johnny_boi85]

hey huthy14 did you have much trouble to get to the sensor to clean it

 

[RiCeY]

Rears are PITA, you have to press the axle out of the hub to get at the bearing face.

 

[huthy14]

Rears are PITA, you have to press the axle out of the hub to get at the bearing face.

I didn't do any of that all I did was take the wheel off so that I could get behind the brake caliper and I just undid the one screw and disconnected the wires going to it, just pull the sensor out carefully and cleaned it .

 

[johnny_boi85]

ok cool if this module dont fix the problem i might give that a go. what is the safest thing to clean them with for eg: wd40

 

[johnny_boi85]

just found this havent had a good read of it yet but looks like it may help with wheel speed sensor problems.
Diagnosing Antilock Brake System Wheel Speed Sensors

 

[RiCeY]

I didn't do any of that all I did was take the wheel off so that I could get behind the brake caliper and I just undid the one screw and disconnected the wires going to it, just pull the sensor out carefully and cleaned it .

The debris sticks the the face of the bearing that the sensor reads off so just cleaning the sensor doesnt always work. Obviously it did in your case so it is worth a try.

 

[RiCeY]

Just wipe it clean with a dry rag.