vl wiring

[ntr32]

i am try to do an rb30 conversion i need to know the pin outs for the three main engine bay plugs (large grey R/H side of engine bay and the two internal ones blue and black any help would be appreciated

 

[Scrusy]

Google a diagram. I've found one before somewhere in the google world

 

[bachig24u]

pm me if you still need this. I've done a few conversions.

the OEM VL loom uses 3 wires to get it running in a lawnmower.
Pink is main power, black earth and RED for ignition switch. I have the ECU pin outs and body loom diagrams if you need them.

If you know someone who is a machinist, and can turn a dizzy base up, you can run the VL ECU on your VK or whatever inline 6.
I'm able to fully reconfigure the ECU's to suit a stack of combo's.

 

[Engines]

pm me if you still need this. I've done a few conversions.

the OEM VL loom uses 3 wires to get it running in a lawnmower.
Pink is main power, black earth and RED for ignition switch. I have the ECU pin outs and body loom diagrams if you need them.

If you know someone who is a machinist, and can turn a dizzy base up, you can run the VL ECU on your VK or whatever inline 6.
I'm able to fully reconfigure the ECU's to suit a stack of combo's.

Yes please I need this