Mod problems :(

[TobyDSim]

Finally booked my car in (VT, L67) to fit the following...

10 psi YT press on pulley with larger idler
1.95 YT roller rockers - The rocker gaskets were leaking anyway so I thought I might as well get it on all done in one hit.
YT CAI
FIT 4 inch MAF ducting and relocator
Colder plugs gapped to 1mm
Hi-Fkiw 91c Thermostat
HSV XU6 Chip
MACE 25mm Manifold Insulator
1 5/8 inch to 2.5 inch stainless extractors
2.5 inch twin metal cats
2.25 twin hsv exhaust

So 1061 dollars later and I have on:

10psi pulley - Had to take the hole snout off and put it in a bearing press to change pulleys, tried it with larger idler first but belt wouldn't fit. went back to standard idler and it fit... Something to do with the Insulator raising the Supercharger.
1.95 YT RR - Went in no worries. Well mostly compared with the other two mods.
25mm Manifold Indulator - They reckon the holes were 2mm off so they had to drill them out, bolts were too tight and would of split the insulator, and also the Insulator was hitting a bracket at the back (or something along those lines). Which took an extra hour or there abouts.

Has anyone else had any trouble installing any of these mods?

Cheers guys.

[MACE]

I can't speak about the other products, however if you there were any issues with our items would have more then happy to resolve or clarify the process over the phone or via email. Still am if it's of any consolation

If you have any questions please don't hesitate to ask.

Cheers,
Steve

[TobyDSim]

Don't think it would of made much difference to be honest... As there were instructions with the Insulator.

And the work is done now. So I'm just going to have to bite the bullet and pay for what's done... And get the rest of the work done elsewhere.