VN s1 alloy rocker covers on later engine

[savage1987]

How?

Do I plug that breather hole, and if so, what with?
Please tell me I don't need to weld it up (can do later if need be)

Any info appreciated
Sam

[hakhawk]

find an appropriately sized rubber bung, put it in.

ive seen some people cut the breather hose with say half an inch left over, and bunging or crimping that.

just use your imagination

[savage1987]

Sounds good. I tried to pull that breather pipe out. Proved a little difficult I was pretty well standing on the cover and pulling on the thing as hard as I dared to... got nowhere. Ah well, 'twas a handy handle for painting

[Zuicider]

*sigh* sikoflex num nuts

[cracker]

i got mine tig welded up cost me $30

[savage1987]

I'm just plugging it for now, will look into welding later on MAYBE

[immortality]

i used a blank rubber grommet from supercheap

[savage1987]

Sounds like a plan!

[HIROLLA]

wanna sell em?

[Pub247]

i got a rocker cover in the shed with the hole i welded up if anyone wants it let me know
Was for a my old vp but no longer have it. I only have the one cover so you'd have to find the other yourself. Also cant remember if i cleaned it up might need a little die grinding on inside if it fouls with anything

[pow3rslave]

i got a rocker cover in the shed with the hole i welded up if anyone wants it let me know
Was for a my old vp but no longer have it. I only have the one cover so you'd have to find the other yourself. Also cant remember if i cleaned it up might need a little die grinding on inside if it fouls with anything

how much you after? i have the other side one, (had both but gave one to a mate to weld the hole, he warped it.)

[savage1987]

wanna sell em?

hehe nope. Need em for thermal properties, may have an exhaust dump going right by the passenger side cover soon

i got a rocker cover in the shed with the hole i welded up if anyone wants it let me know
Was for a my old vp but no longer have it. I only have the one cover so you'd have to find the other yourself. Also cant remember if i cleaned it up might need a little die grinding on inside if it fouls with anything

I will stick with the grommet for now, someone else can have this
If you can't get rid of it soon as you'd like then by all means let me know

[Pub247]

well ill give it away to anyone who wants it just get the other side from the wreckers

[Pub247]

because im bored ill go pull it out of the shed and take some pics

[Pub247]

heres some pictures i even got a set of new gaskets i can throw in too hows that for a deal???
This one has been bead blasted too so its nice clean good if you wanted to polish it

[Pub247]

Rocker cover is now sold a few pictures and a free pricetags convinced savage he wanted it

[savage1987]

hehe yep. Lucky for me I was quick.

Shame I wasn't as quick for a turbo on ebay I missed out on over the weekend

[pow3rslave]

damn you savage, i would have gotten away with it if it wasn't for you meddling kids!

[savage1987]

hehe I was just too quick for you!!