engine mount bolts

[stocky]

im missing a bolt out of each engine mount, the bolts that go into the motor itself. is there anywhere i can buy these individually?

[policehoon]

Yes you can, just go to Coventry's and ask for another one. Its easier if you know exactly what size bolt you are after.

Or you could try a reputable tool shop, they normally have plenty.

Or you could try a Wreckers, now they would have plenty

[stocky]

does anyone know what type of bolt they are exactly? its for a 5 litre VR

[Pub247]

Go to a bolts shop or something like dandy fasteners i'm sure there's one around your area . Finding out length and thread pitch and size is your next problem. You drive there take one out and show them then put them back in your car

[Morton]

Yup, I was going to suggest something similar - take one out, show them, and ask for another one There's a great place on Molan Street in Ringwood that should have what you're after.

[Blown V6 Hatch]

Have to be careful though, as Holden V8's run 2 different size engine mount bolts. 2 are 14mm head and 1 is 16mm head....Make sure you get the right one!

[DANNY8]

Holdens should be able to look it up on the computer and possibly order them in. I recently got 2 main bearing cap bolts from them....cost like $1.50 each. The program they use pretty much shows an exploded view of every part and most times it shows a part number for every nut and bolt. You could get unlucky tho and they won't be able to get them....but yeah no harm in trying.

[Pub247]

I checked a couple of threads out today at work on some built motors they are 3/8 unc x 20mm deep these are the top 2 on the block, as TIm said there's 2 types so im guessing the bottom one is the larger but they'd all be 3/8 unc thread

[Blown V6 Hatch]

No, the bottom one is a bigger thread also. I would say the bigger one would be 7/16 UNC....

[stocky]

cool thanks guys. ill go to a hardware store tomorrow and see if they have anything, although i dont like my luck

[Morton]

you rang?

[greenfoam]

*slaps forehead* Stocky bolts come from bolt shops or engineering shops not hardware stores, not unless you want a cheap as galvinised bolt to hold your rose arch up. Holden will definatly have some too

[stocky]

nope holden dont make them anymore

[PEAKN6]

just at work now and thought id take a screen shot for ya

No.9: 00454905 (Joint in SA has a couple and also a joint in WA has a couple)
No.10: 122246 (Obsolete)