What i used:
As with any paintjob, PREPERATION cannot be stressed enough! Ive learnt this the hard way many times before.
Step one:
After removing the interior piece from the car, First wash with warm soapy water ( bucket filled with warm water and dishwashing liquid is what i used)
and allow to dry.
Step two:
Grab your Wax and Grease remover and apply as you would a polish almost. Then with a seperate DRY cloth, wipe the remover off before it drys away.
Step three:
Painting time. Find the cleanest/ least dusty place you can find to paint.
Step four:
Applying coats evenly, paint as many coats as desired (I have done 4-5 coats each panel) I felt i get best results by doing a thin first coat followed by several heavier coats. Leave around 20 mins between coats.
Step five:
Leave to dry overnight, Putting it all back together the next day.
Hopefully that helps.
ash