vh 308 trimatic to t5 v6 conversion questions

[benny999]

ok first question any change to the tail shaft is it an easy fit do i need to change the exhaust at all, can i just use my standard pedal box, is there anyone around that would do it for me ?

[VBRED]

You will need a T5 yoke fitted to your tailshaft. You would need a y pipe and cat. If your system is a 2.5" you might be able to use the rear section. You will need a clutch pedal fitted and change you auto brake pedal to a manual so probably easier to change it.

The electrics need to be considered as well. You will need fabricate a gearbox crossmember.

Your suspension for a V8 would be better changed to a 6 cylinder springs otherwise could be too rough.

There is a thread about it on this site. Read it. It is most helpful.

I have just almost completed mine. If you were to pay someone to do it it would cost a fortune. Their is plenty of info on this site.

[Zuicider]

and k frame just buy a doner and rape it

[benny999]

oops i mean a v6 t5 box into my current 308

[VBRED]

All of the above plus steering rack and the lower part of the steering column.