Sound deadening sheet for the firewall

[SLE-883]

Anyone know where I can get the sound deadening sheet for the firewall of my VH?
The one the car currently has is falling apart.

I'm sure I heard that they don't make one to suit the VH But I believe there is a product called bituminous sticky-backed sheets.
Has anyone used it of do you have any other suggestions?

Thanks

Daniel

[180sc]

try auto carpet places like knox molded auto carpets in vic.

[ari666]

yep, knox carpets all the way.

there are two types, dynamat and resomat. reso are cheaper, thinner and harder to install, dynamat have a pic of chip foose on them so much more expensive, thicker and easier to apply.

and shiny

and there is a pic of chip foose

[SLE-883]

Thanks for the replies guys. this is the sound deadening/heat protecting stuff that goes in the engine bay against the firewall not the cabin, right ?

Anyone ever used it before?

[vk.jonno]

im pretty sure u can get dynomat cheap on ebay

DYNAMAT XTREME BULK PACK 8 SHEETS 32 FT² 2.98M²& ROLLER - eBay Accessories, Cables, Audio, Video, Car Parts, Accessories, Cars, Bikes, Boats. (end time 18-Dec-09 15:56:37 AEDST)

[ari666]

lol, if you thinks thats cheap then by all means...

anyways to answer the question, this is not the same as the stuff thats there from factory, this stuff is much better. water proof, better sound deadining (if thats a word) better heat reflection. once you apply it properley itll be there for the next 50 years. that rubber/material crap thats there from factory falls to bits in a week.

edit* actually.... that IS cheap. lol, might get some.

[SLE-883]

Anyone have a picture of an engine bay with this installed?

[ari666]

oops, soz. didnt read it properley. no this stuff goes in cabin. my bad again. what sound deadining is in the bay? mine doesnt have any.

[vk.jonno]

i thought he was asking for the stuff that goes on the inside of the car where the dash is
if that makes scence?
i think that it is cheap for the brand, appently its really really good
but i have no idea at what stuff is valued at i just thought that would be pretty cheap..
cos its 8 sheets n yeh lol

[no-doof]

My VC firewall in the engine bay is covered in that black rubber crap. It's all falling off and looks terrible. Trouble is it looks like a major pain in the @$$ to remove while everything it still in there so it can stay until the engine comes out. Also some have it on the underside of the bonnet too.

[ari666]

yeah the stuff under the bonnet i have seen, but never on the firewall itself. maybe they did it with older models but not VK? dunno. anyways, it would achieve f.. all having deadiner on the outside, except store water/oil/dirt so i say rip it off. most of the sound is stopped in-car anyways.

[vk.jonno]

yeah i dont have it on the top of the bonnet or on the fire wall
ari666 do u have the 6 or the v8

[SLE-883]

This is the stuff i'm talking about.

My VC firewall in the engine bay is covered in that black rubber crap. It's all falling off and looks terrible. Trouble is it looks like a major pain in the @$$ to remove while everything it still in there so it can stay until the engine comes out. Also some have it on the underside of the bonnet too.

That's my problem.


I friend of mine had the stuff removed from his VB when he did the efi conversion and now his cabin gets as hot as hell from the heat off the exhaust.

Maybe an option is lining the firewall in the cabin instead. at least this way the engine bay looks cleaner.

[SL/ENUT]

That stuff is rare as rocking horse dung. Only way to get that stuff is from a wrecker.

[ari666]

lol, i dont have that on mine. personally i would heat treat the inside (cabin) and leave that part bare. it just looks like a way of introducing rust.

VK johnno; mines an 8, although i would be very happy with a 147.5kw 6 cylinder...

[vk.jonno]

ohk i was just wondering cos mine all of a sudden has given up and has the worst acel and gearbox is taking forever. i mean it was fine before but now its just giving up ohwell
ill take it to the shop and get a good service and a good tranny service and if thats no better.a rebuild or a rb30.

[no-doof]

I didn't even think about the heat coming into the cabin from the exhaust with taking that off. Ah well, I will prob get some stuff for the inside of the firewall when I do mine. I am going to get my ehaders ceramic coated too, which apparently stops the heat radiating as much (and looks sweet too). See how it goes I guess.

[ari666]

well, ceramic coating does a hell of a lot more than just keep your firewall cool. it actually keeps the heat inside your exhaust which helps exhaust gasses maintain size/velocity. but yeah, story for another day. if you can afford that, by all means do it. going a bit overboard for a stock-ish build tho.

like i said, i dont have that stuff on mine and the firewall doesnt get noticably hot. the floor gets COOKING when temps go up on a hot day but thats cos the exhaust is right next to the floor. no heat shielding down there sadly.

[no-doof]

It won't be a complete stock engine, I'm just going to do the conversion first and get it engineered and rego'd before I do anything. Looking at V8 throttle body, cam and head work. See how we go I spose. Ceramic coating isn't actually that expensive. I was quoted around $300 for straight 6 headers. Don't know what they will be for a V6, just have to wait and see I suppose.

[SLE-883]

I'm looking at ceramic coating the headers too.

I think I'll take the sheets off from the engine bay and through them on ebay (it will make the engine bay look better too) and later on install it in the cabin if I find it gets too hot and noisy.