Hey everyone,
I have a VK royale with the injected 202.I have picked up a complete v8 vh and am in the process of swapping the interior over as i prefer the vh interior.Will the dash bolt in?Will i have to change any wiring?Im ditching hte 202 and putting the 308 in its place.
Do the door trims fit straight on?
wiring is a bit diffferent, but otherwise dash is a straight fit. You'll have to use the VK heater/ventilation controls though as the VH uses links instead of vacuum controls.
door trims are the same
Both dashboards pretty much have the same controls, they're just set out differently and using different buttons. When going from VH to VK all we done was snip all the plugs off the dashboard wires in the VH, and adapted VK plugs up to everything. Some were a bugger and took a little nutting out. But as long as ya got a VH and VK dash wiring diagram it's not to bad.
We never worried about the a/c or heaters tho, left the whole unit out.
VK Wagz 308 - [Buildup Thread]
VK Wagz 253 Twin Turbo - [Buildup Thread]
VK Wagz EFI 5.0L 5spd - [Buildup Thread]
TECH: VK EFI Conversion - Fix your dead EFI 5L ignition module - Trimatic shift kit
Cool, doesnt sound to hard then...
How much of the wiring did you have to chop and change?Wheres the best place to find a wiring diagram?