manual conversion kit for vh

[TY318]

hey everyone
anyone know where i can get a manual conversion kit for my vh iv got the 202 and how much and what boxes i should keep awear of and so on

[Jedwards]

Yeah same, where can i get these parts from? I sent rare spares a email, I couldnt find much on their website, I have a aussie 4 speed im wanting to put in.
Is the gearbox a pretty straight fit? and how do i go with the pedal box and the holes needed to be drilled into the firewall?
Help would be appreciated thanks guys.

[vkberlina]

What holes are drilled into the firewall every conversion I have done I just all bolts in!!! There is a manual conversion list of parts in the VB-VK area here, aussie 4 speed came in vhs yes it will bolt in. Start calling wreakers for pedal boxes, start close then get further away till you get one.
scott

[Jedwards]

What holes are drilled into the firewall every conversion I have done I just all bolts in!!! There is a manual conversion list of parts in the VB-VK area here, aussie 4 speed came in vhs yes it will bolt in. Start calling wreakers for pedal boxes, start close then get further away till you get one.
scott

Thanks soo much mate!
So I really only need a pedal box and clutch cable?
Do you think i could get it done in a weekend?
Thanks mate, I seriously appreciate your help.
Jedwards.

[vkberlina]

You can buy a clutch cable new, there is a spacer on the clutch cable on the engine bay side of the clutch cable.
I did my first manual conversion over 2 weekends just incase of problems, did the pedal box first as I could still drive the car the clutch pedal just sat on the floor. The following weekend I did the gearbox.

scott

[Jedwards]

Okay sweeet mann! Yeah, This is my first major modification to my commie, and the first major thing i have done.
Do you think you could tell me a bit more about the conversion?
How do i go with the bellhousing and all? All i have is the gearbox, just the box and shifter, and what comes off the car.. Im not sure of what i need to keep.
Will the standard tailshaft fit nice?
How do i go about clutches and the parts inbetween the gearbox and the flywheel?
This is supposed to be my daily, so i would love to know and get everything together before i go and do it all so i wont have the car in parts.
Also, I could not find this list of parts for a conversion in the fourms?
Thanks again mate, Appreciated greatly.

[vkberlina]

dude search the forum its been covered before on a step by step, be prepards to run into snags along the way.
Install a new clutch & pressure plate, thrust bearing & spigot bush, have the flywheel machined. If its an aussie 4 speed run castrol vmx80 in it.

Search provides many results
202 manual conversion help please lol
Fitting VK SL with manual gearbox
gearbox change?? advice
2 quick questions...
another manual conversion thread

ok im sick of cut & paste
theres heaps more have a read then ask away

scott

[Jedwards]

Oh sweet, cheers man! When i searched it didnt return those :/
Yeah I got that oil ready to go, thanks mate!
You have been a great help.
John.