vs seats

[bjwynd]

just wondering iv had a bit of a look and i reckon the saets out of a vs would fit in the vb front and back has any one already done this how did turn out

[vk.jonno]

Need longer bolts
And I think u need to do new back hole from memory

[pjdm1980]

The back seats won't fit as they are to wide but i think you change the rails over on the front seats.

[vkberlina]

The back seats won't fit as they are to wide but i think you change the rails over on the front seats.

Correct this has been covered a number of times

Either buy a set of 85 VK seat rails or buy the outter rails for vn-vs and pair them up so the outter D/S and outter P/S rails will make a pair and become one pair. Fron memory using the vn-vs rails the seat will actually sit about 10mm lower in the car

cheers
Scott

[weston]

Ive done this in a VH, i got front and back seats from a VS Berlina and fitted them in buy drilling a new hole in the inside rail at the front of both seats and made a spacer between the floor and rail. Otherwise the holes line up nicely, (may not be totally legal but was able to cover it up with the carpet) and for the back seat yes it is wider than VB -L but with a little cutting here and there on the wire frame i made the lower half fit.
Now when the rear doors are closed the side of the lower half sort o spring inward without a hassle, as for the top half i once again played with the wire frame a little and drilled hole in the back wall and bolted the three bits into place.

[bjwynd]

got some pics off the back