replacment seatbelts for holden vh

[TY318]

hey guy
it got me thinking when i was cleaning out my car and vacking the seats n crap the seat belts in the back are non-retractable lol i was thinking of replacing them with retractable ones im not sure how to go about it or how much it would cost can someone help me out thanks

[vh-sle]

Rare spares ave them, $126.50 each, here's a link:

https://rsp-secure.com/rarespares/de...VH%20COMMODORE

That said, I got a nice set out of a VL.

[TY318]

would seat belts from a vl fit mine

[GetToDaChopa]

Just check on ebay for some second hand one dude. I had to replace mine to get a blue slip it cost me $15 for another seatbelt that retracts and is in good condition. Not sure about the VL fitting right, but even mine was from another car and it fine, maybe from a gemini or it could have been from a VK/L

[garvs]

For rear seatbelts you have to get VH ones as the mounting points are different between VK/VL and VH

I purchased a really good condition set off ebay a few years ago that were from a VK and they definitely don't fit my VH as the unlocker thingy in the seatbelt mechanism does not work unless its on the correct angle

VK mount on their sides on a vertical angle which is different to a VH which mounts on the underside of the parcel shelf upside down
as shown here



My VH ones are retractable so they did come with them just got to find a good set... that's the trouble haha

With the fronts VK ones fit the same as a VH (though are a different style), you just also need to change the stalks as they changed the locking style from a larger open type to a smaller closed type... but VL ones fit but don't work correctly... slightly different angle and always lock up all the time on the fronts... I had one on my drivers side and it did this all the time and it was a pain in the ass lol

So in a nutshell you will need VH ones .... VB and VC ones prob fit VH too.... I would say but don't quote me on that haha

[ari666]

klippan make direct replacement belts for 90 bucks each. but really there is nothing wrong with lap belts.

[Darren_L]

klippan nor rare spares made rear rectractables for VH when I was chasing a set for mine, so I bought a good set of VK's from the wrecker, had to modify them so they would unlock

[ari666]

http://www.autolivaftermarket.com/wp...27ff46abe5818f

you have to do some investigation. without looking at the length of the buckle i would say it is the K7222 which has an adjustable buckle.

[glenn l]

i had to put new ones in my vh when i rebuilt it, i chassed around and couldnt get a set i liked, i got a set of klippan, altho they looked different they worked so much better than a second hand set.

[TY318]

so i guess vl ones wouldn't fit