Diff???
Hi all, just wondering will the diff out of a v8 vk wagon fit a v8 vk sedan?
Originally Posted by HamaTime
Yep it will fit but you have to cut the mounts off and weld the ones off the other diff on I have done this before
look at the bloke on your left now look at the bloke on you right now look at your self 2 out of the 3 people you just looked at are dead sh@ts which one are you
The SL/E Fanatic!
Don't do it, way to wide scrubs like buggery. Also you have to be careful welding bit onto it, due to loads it will take.
Cheers Damien"SL/ENUT" Smith, The SL/E Fanatic!
A lucky owner of 2 SL/E Commodores, a rare VB SL/E and a 2 tone VC SL/E. Just need a VH SL/E and have the set!
iv done it with 8 inch wide tyers on didnt scrub on me
look at the bloke on your left now look at the bloke on you right now look at your self 2 out of the 3 people you just looked at are dead sh@ts which one are you
The SL/E Fanatic!
Got one in my sle, with a load scrubs on passenger side.
Cheers Damien"SL/ENUT" Smith, The SL/E Fanatic!
A lucky owner of 2 SL/E Commodores, a rare VB SL/E and a 2 tone VC SL/E. Just need a VH SL/E and have the set!
Maybe your panhard is bent or you need an adjustable one.Got one in my sle, with a load scrubs on passenger side.
No the diff will not fit without modifications as stated above. Surely it would be easier to get a VL sedan diff and put that in. I have just fited a VL 3.08 28spline LSD to my VK sedan and it just bolted straight in, got to be easier than having to change all your diff mounts, or look for a swap maybe someone with the sedan diff you want will want your wagon one, or just change the internals over to a sedan housing, but thats not that easy to do with out some prior knowledge either.
The SL/E Fanatic!
Nope not bent at all and have tried an adjustable one too. The diff is a few mm wider than a VL sedan diff, a few mm shorter than a VN sedan diff. Wide buggers.
Also, its lowered so the tyre that should scrub would be the drivers side.
Cheers Damien"SL/ENUT" Smith, The SL/E Fanatic!
A lucky owner of 2 SL/E Commodores, a rare VB SL/E and a 2 tone VC SL/E. Just need a VH SL/E and have the set!
yeh its not for me as such but one of my dads work mates is building a group c replica and bought a v8 wagon lsd and the n discovered it didnt fit and was wondering if it was different diff or out of a different model and if i was to get it rewelded i would get the welder at work to weld it for me
The SL/E Fanatic!
How about changing the centres over?
Cheers Damien"SL/ENUT" Smith, The SL/E Fanatic!
A lucky owner of 2 SL/E Commodores, a rare VB SL/E and a 2 tone VC SL/E. Just need a VH SL/E and have the set!
it doesnt really matter i dont think he bought a vk wid a cut down 9 inch and was having brought over to use as far as i know
you dont need to change shock mounts either just pop the rubbers out of the sedan shock and use wagon ones, had a wagon diff in my vc sedan with *" wheels and 245 rubber dumped on its guts and never scrubbed once.
Current project VH SL SEDAN 202
http://forums.justcommodores.com.au/...-83-vh-sl.html
Last project VH SL WAGON L67
http://forums.justcommodores.com.au/...h-wagooon.html
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote