vh carby help

[mojo_gc]

Hey guys so finally got my vh running was just wondering if anyone knew where to get a vh carby manual from, she doesnt seem to be idiling to well was going to get into the fuel/air ratio screw and have a muck around but want know what the stock setting is first..

Anyone be any help

[ari666]

what engine? what carb?

[mojo_gc]

shit, sorry that would probably help, its a 202 blue top with a varajet 2 carby
Reece

[Darren_L]

this would be the best book for what you are chasing. Good price, they are fairly rare these days
http://www.abouttimespares.com.au/showpart.asp?id=1638

[mojo_gc]

so no one can tell me what the stock setting for the fuel/air ratio, its been molested need to get it back to the stock setting and can go from there? Dont really want to buy a book, if you can understand only a shitter for the farm...

[ari666]

initial timing should be at 6 degrees @900 rpm. if its auto, then make sure its in D. stick a vacuum guage of full vac (off the carb, dont use manifold vac) then turn the idle mixtures in all the way, then back them off 3 full turns. after that its about 12 hours of really fine adjustments until you achieve the highest STABLE reading.

[mojo_gc]

ailright cheers buddy ill give it a go

[ari666]

i did a detailed write up on how to tune a quadrajet: how to rebuild/ modify quadrajets (also vac hose diagram) which should be very similar to your carb.

give it some time to load though, its really pic heavy.

[mojo_gc]

Hi sorry i have taken so long just been pretty full on with uni at the moment, can someone please tell me what this screw is and what its standard setting is, i just want to get her running again for the farm on sunday..
Reece

[ari666]

no idea bud. sorry.

[mojo_gc]

found out its the fuel progression screw, looks like im going to have fun finding the stock setting for this one

[ari666]

do you have a vacuuum guage?


i will look up my manual when i am not off my face.