Help Needed Setting Clutch Peddle Spring
Im changing my vk with a 3.3 from auto to manual everything is in except for the peddle box coz i cannot seem to work out witch way the spring goes on to the clutch peddle if any can help me with this it would be good cheers
VK Madman
have a look at the attached picture
Loads of VB-VK information, All you need to know about EFI 5L Conversions Ultimate EFI 5L Conversion resource "
Wanted B Cast Heads PM for details
any chance of a front on pic instead of side cheers
VK Madman
here you go try this one
Loads of VB-VK information, All you need to know about EFI 5L Conversions Ultimate EFI 5L Conversion resource "
Wanted B Cast Heads PM for details
that peddle box is way different
The SL/E Fanatic!
Sounds like you have a different pedal box then, cause the pics Scott has posted up are from(looks like it to me) a 6 cylinder Commodore.
Cheers Damien"SL/ENUT" Smith, The SL/E Fanatic!
A lucky owner of 2 SL/E Commodores, a rare VB SL/E and a 2 tone VC SL/E. Just need a VH SL/E and have the set!
yeah well the box n peddle box came out of a vh 202
dah dut dut da dah
clutch should be 25.4mm/1" (pivot)
slack should be 10mm-3/8" (pedal travel)
Research has shown that men usually sleep on the right side of the bed.
Even in our sleep we happen to be right.
Powered By Garrett
thanks for that but i cant get the spring on properly for some reason..to be able to adjust it
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote