Can a black 202 carby engine be supercharged???
i want to find out if it is possible to supercharge a black 202 carby engine, if so what brands should i look for and where?????
The Future.
Same for the blue 202 ?
Originally Posted by Jamie-b
yeh but why would you?...you are talking an engine designed over 40 years ago, you are going spend a fortune to get any sort of result from it without it going bang
you are much better off doing a V6 conversion, or buying a L67 (factory supercharged V6 from the VS-VY), your wallet and sanity will be the real winners, and the thing will go like a rocket
300rwhp supra. yay.
Why not?
use something like this
http://www.capa.com.au/vortech_performance_carby.htm
and blow through the carby. Mabey an sc14?
300rwhp supra. yay.
That makes life easy.This may be of some help. Or maybe not...
dont mind the look of that, wonder how much it would set you back??? and how long till you blow the side of your block out!This may be of some help. Or maybe not...
nothing wrong with putting an sc14 on a 202, im going to do it when i get a 202 again.. was going to do it to the calais too..
DaZ
Project: Shifty1 commences Feb 2007
The_Monk says:
im a leech
America just kicked in yo
Yeah it can be done and with some good results, forced induction loves big lazy engines. When you get bored with the draw through SC setup you can move onto a turbo charger. I saw an LJ at the track run 11 sec passes all day with a turbo 202.
A 202 is a very tough engine if certain pieces are replaced like the timing gear for an alloy one etc. My mate was doing his mechanics course and they got this 202 and tried to blow it up with constant full revs, it took around 45 minutes at full throttle to kill it.
========My Statesman 20's Mafless and 3.9's========
300rwhp supra. yay.
Read the whole thing......
ahhhh, $2000 (pretty much)
would it be an idea to rebuilt your motor !before installing? alot of 202's have 200000+ km's on them, i know mine does!
300rwhp supra. yay.
You can rebuild 202's cheap. Ive done one with ACL pistons and a few other goodies for just under $2000. It went into my mated torrie and made some good power. till the throttle got stuck and it bent a couple of valves....
But still you could do it with some low comp pistons and new bearings for nothing at all.
would there be a supercharger kit for the 202 EFI's?
cheers
Castlemaine Rod Shop has a kit around 1500 but its too small for a 202.
You could put a 4/71 on it but you would have to get a manifold made for it.
<---Brad Quaid = internet stalker
when you reply to a post, check that it is still worthwhile by reading the date it was posted in the top left corner of the each post. i think you'll find in this case you have replied to a question asked nearly 3 years ago.
CRS are still working on one, but it can be done from thier carbie sc14 kit. All you really need are their brackets ($300) and an sc14 off ebay ($400), the rest you can do in the garage with locally sourced parts. See mine in the rides section.would there be a supercharger kit for the 202 EFI's?
cheers
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
