VC seatbelt lower area

[Goon]

Hey all

Does anybody know how to remove those pin things that hold the case at the bottom of the seatbelt area, i need to put wires under it

Thanks

[SL/ENUT]

!Please do this slowly and be patient, very brittle plastic!
Ahhhh i know what you mean. You need to grab a small flat head screw driver and there is a slot cut in the pins that hold the seat belt cover on. Prise the pins slowly cause these are very brittle. Once all 4 pins are out so far, nearly all the way the cover can be taken off.

[Goon]

Cheers mate

Will do !

[V-ahhh]

!Please do this slowly and be patient, very brittle plastic!
Ahhhh i know what you mean. You need to grab a small flat head screw driver and there is a slot cut in the pins that hold the seat belt cover on. Prise the pins slowly cause these are very brittle. Once all 4 pins are out so far, nearly all the way the cover can be taken off.

yeh what he said^^^^^

[Outlaw Torn]

from memory u might need to loosen up the trimmings on the sill to replace it properly, but this is only from memory.