Results 1 to 3 of 3

Thread: tri matic problem

  1. #1
    Ride
    94 vr 5sp, 04 vz wagon,82 vh efi wagon,88 vn 5sp

    Join Date
    Nov 2003
    Location
    northside brisbane
    Posts
    2,369

    Default tri matic problem

    Have a intermittent problem with the trimatic in my vh 6cyl.
    From cold when you take off it goes through the gears and when hits third gear it freewheels like you are in neutral until you back off and it drops back to second ...then you accellerate again until it does the same thing...back off and then accelerate again it selects gears ok and continues to work ok until it sits for about 3 hours and the oil cools down and the fault reoccurs and you go through the same process....anyone had that problem before?
    Does it sound like it is in the valvebody? ...I was hoping I wouldnt have to pull the whole auto out .............it has been recoed many years ago and since it was my parents car hasnt ( I have inhereted for my sons first car) had much use as in probably 50000k since then.
    This is my vr that I rebuilt ....CLICK HERE to see my vr on Cardomain ......if you want to check it out......Anyway make sure you rubbish a ford daily ....I am a 4DH8RZ Club lifetime member .................new members joining everyday

  2. #2
    Ride
    the lightning

    Join Date
    Jun 2005
    Location
    under the Southern Cross
    Posts
    460

    Default

    check all the obvious things like;
    fluid level.. this is critical in autos
    does the fluid smell burnt? if so i'd get a good trans builder to look at it and or try and hunt down a good running trans off one of the many commodore sites on the net if your capable of changing a trans yourself.

  3. #3
    Tree cutter's Avatar
    Tree cutter is offline Tree cutter
    Ride
    VX Calais SuperchargedV6

    Join Date
    Apr 2006
    Location
    Mt Gambier SA
    Posts
    702

    Default

    I would give the trans a service and see how it goes. The filter could be blocked and only allow enough trans fluid through when the fluid is warm and thinner. Someone might even have put in the wrong trans fluid which could cause problems. So just drain the fluid out, adjust the band and change the filter

Similar Threads

  1. Pt 2 cold starting problem - Is my ECU the problem??
    By manfred in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 13
    Last Post: 10-05-2007, 09:56 PM
  2. Sub Or Amp problem???
    By calais_cruzin in forum Car Audio
    Replies: 19
    Last Post: 17-01-2007, 01:44 PM
  3. tri matic problem
    By markovr in forum VB - VK Holden Commodore (1978 - 1985)
    Replies: 0
    Last Post: 25-11-2006, 08:13 AM
  4. VN problem
    By Anne in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 2
    Last Post: 06-06-2006, 01:49 PM
  5. Hurst Pro-Matic 2 wiring into VH
    By YellowVH in forum Electrical Wiring / Questions
    Replies: 1
    Last Post: 09-09-2005, 03:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71