Does anyone know how to reset the service reminder on an 08 sv6
Hold down only the up & down arrow buttons (below the mode button) of the trip computer.
Turn the ignition to ON
After about 3 seconds the service reading will appear
Release the up & down arrows
You'll hear a beep
Hold the up & down arrows again & it should reset
Turn the ignition off.
No more service warning
(that's off memory so hope it's accurate- but it is in the standard manual that comes with the car).
Doing a search for the answer for the VE seems to come up with this;
Hold trip button whilst turning ignition on. Release trip then press and hold enter for atleast 3 seconds.
hold trip button while turning ignition on. Release trip - press and hold enter at least 3 seconds. Job done.
The guys only done 2 posts so give him some slack iam sure we were all like this at the start
Just tried the procedure on my WM Stato (hold trip button while turning ignition on. Release trip - press and hold enter at least 3 seconds.)
and it worked, excellent job.
Thanks, I googled how to reset service indicator on VE, got this thread, read thread, did as advised on my WM, voila, reset good