anyone know of manual to change timing chain or is my problem not even timing chain

[SV6.07]

i am looking at having to change timing chain on my SV6 error codes have been told its timing chain. even though many ppl even holden told me the 07 didn't have issues with the timing chain. and the car has very low km on it.am getting check engine coming up sometimes not everyday maybe every 2nd or 3rd day and the car feels like its got a miss in engine. still runing smooth seems to lost a little power doesn't accelerate like before. idles fine smooth no rough idling at all. no noise from engine at all. the mech i talked to.. all said you cant hear the timing chain at all.. the engine is very quiet. anyone had similar problem with engine feels like its missed a little when driving like a surge and down. but in the smallest amount. i download the manual but it shows all about the engine and all else. but cant seem to find about replacing the timing chain procedure. used to build my engines when i had my EH HR and SLR so have a background on engines. but didn't want to dive into my SV6 without having some idea of procedure on doing it. pity i dont know of any mech here in south east of anyone who has done this job on there own car. dont mind paying them to give me a hand on it my mech wants $1600 to do it. a day and half job. so anyone here in south east either done this on there car. or holden mech want to make some cash on giving me a hand. am not asking them to do all the work. i just would like to have them to advise me on what to do. i know there are holden mech on this site. might want some extra cash to give a member a hand . PM me if u want to give me some advice or anyone know of the manual to get to do this timing chain..

many thanks in advance to all the members

[vn4250]

symptom for my timing chain issue before was:

engine less responsive
chain rattles only when starting car
engine a bit wobbly
scanned codes P0016 P0018

fixed it myself but i can understand why mechanics wants $1600 to do it. i think that's a fair price, considering its a major pain job to do.
good luck with it.

[SV6.07]

did you have some manual or your a mech. to give you the procedure on changing the timing chain.

[bobby001]

There is a mechanic in dandenong who fixes it for about 500 dollars even less if it has had the maifold amp rework

[ms_enj]

i am looking at having to change timing chain on my SV6 error codes have been told its timing chain. even though many ppl even holden told me the 07 didn't have issues with the timing chain.

MY07s did indeed have timing chain issues, but only until the chain was updated in between late April and early June. What month was your car built? It's on the compliance plate.

[SV6.07]

do u know who the mechanic is in dandenong.

[Sabbath']

There is a mechanic in dandenong who fixes it for about 500 dollars even less if it has had the maifold amp rework

You would be hard pressed to find quality parts to complete the job for that much.

[kizza50]

Anyone got more info on the software that fixes the hardware haha

[VNSSMAN]

Just got the new software done 17/4/12. Dumbass dealers didn't know it needed a vim connector so I have to wait until that gets sorted. Should be fine after that. The car with update runs a bit better so far but light still remains on unroll I get the vim. However i think some mechs would want you to do the chain because more money in their back pocket. Keeps ppl like sabdog in a job

[StatesmanV8]

I know holden has brought out software upgrades for 07/08/10/11 ve v6 for error codes on timing chains so they dont need chain until this software upgrade has been installed, only 09 ve v6 need timing chains. for dtc p0008 set.
I would recommend paying the hours labour charge for new software upgrade first than spending many thousand of dollars repair on chains.

[bobby001]

the guys in dandenong its dandy roadworthy centre 97931645