iv swaped motor an auto gearbox in me vl turbo an put a new moter an manual gearbox in but now the motor run like a billy goat bracks down an after about 15 miniuts it shuts down can any one help![]()
hmmm so it runs but rough yeah ....maybe cas is doughy
yer it sort of runs off boost an if u try flattenen it it it splaters then like i say it shuts down an wont go as in wont start for about 15 min would the turbo timer have any thing to do with it if it was hooked up wrong
yeah there is a possibilty the timer would have something to do with it
Have u got another cas u could try might be that 2
it maybe a silly question but have you got a VL turbo computer hocked up instead of the n/a computer
yer i got two turbo computers tryed them both still the same the so faults 14 23 an 31 tryed a afm fuel pump reg oxegen censore tryed deleten codes sprayed contact cleaner around
try another cas mate
tryed new cas runs a little better but still no good burn it i think
AFM and CAS main cause
leads/ plugs/ fuel filter/ fuel reg /CTS/ Oxy sensor/TPS
did u do the timing?? could be retarted.... and as detox-nath83 has said above id check....
could be the ecu... maybe its an auto ecu..
fixed problem must have been wiren changed wiren harness then leakey injector it ran a bit rough but when u powerd on it ran good so i changed injectors then it ran like shit again tryed various things witch didn't help checked oil an there was fuel in the oil could smell it changed oil an plugs problem fixed lucky was ready to burn it
ro have fuel in the oil sounds like the rings are ****ed for fuel to get into the oil