passanger window question

[Goon]

hey all

im asking this first before i inspect it as my windows are still covered in paper for the last of the paint job that needs doing...

only the passanger window does this, u wind it up and before it hits the top it goes on a slant forward and i have to hold it back with my hand just to fully wind it up...

anybody had this issue ?

[VL Berlina 5speed]

either your baily channel is bent near the top and allows the window too pivot
the rubber is stuffed allowing the same

[calais24/7]

mate have the same problem, drivers one goes up 70% and then the front dips in and you have to oull it to get it level and it sorta jumps up when you pull it then its fine. no idea what it might be. and im pretty sure my rubber seals are a ok

[Goon]

either your baily channel is bent near the top and allows the window too pivot
the rubber is stuffed allowing the same

cheers bro ill inspect it when i can..

[jatsvl]

it is probably your window regulator, the regulator arms and support arm are held together by a spotweld which can break and allow movement, this will happen as normal wear and tear or if some ar$ehole has tried to force the window down. also the pivot point on the regulator can develop movement over time the same as above.
replace the window regulator.

[detox_nath83]

i fixed a few like this but on vn commos...
its the scissor looking channels in the door where the nylon lugs sit in and slide as the window is lowered or raised.. the nylon lugs gets warn causing it to twist slightly and drop the window. inspect/replace the nylon runners and regrease channel..
goodluck bud

[Goon]

cheers guys for the extra tips, ill get it fixed