Hey guys
Need a new turbo for a vl. Where abouts could i look to find 1? Does any where in brisbane or gold coast sell them off the shelf etc?
Cheers
either look through wreckers for one
checking for shaft play/wear and tear. or buy a new one upgrading it in the process
dont know of any new off the shelf..
ill let somebody else answer that one:P
have you currently got one?
if so get it rebuilt,
or you wanting just a brand new one and havnt got one?
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
Got one but the seal is stuffed. How much to rebuild? Was thinking of just upgrading. is it worth it to rebuild?
autobahh sells turbos
i cant say as i aint a turbo builder :P
find a local turbo specialist in your area and talk too them
compair cost on a rebuild and getting it hi flowed too a new bigger turbo
make sure you match the turbo to the engine application
get the optimum set up to suit ie manifolds - injectors - tune
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
rebuild kit to suit could source from autobahn/repco/carbits etc etc
ebay rebuild kits for standard t3 are about $80 i believe, have a look on there.
Sleeper Wagon - In the Build
VP Executive series 2
Check out My Ride
Current ModsWidened S/C CAI, 2.5" exhaust, Advance headers, no bellmouth, 17" VY SS, Foamy TuneFuture ModsNew CarWantedMONEY!!!
The shaft of the turbo needs to be balanced when it is rebuilt, or it will destroy itself.