The aircon/heater fan operates intermittently on my wagon. I.ve changed the switch block over and it worked Ok for a short time, then started doing it again. What is the most likely, Fan switch on the control block or the resistors ?
does it work if you move the switches around a little bit like move the temp or direction switch up/down ever so slightly?
because it is an old slide type variable resistor with 2 rails and ball bearings/springs/contacts the rails become warn as well as the contacts and balls see if u can get a newer switch block or use an alternative
as above, And the fan speed switch are common problems, they are not the best of quaility.
clean the slide control contacts also.
Nobody wants to play with me