n/a injectors and ecu in a highcomp turbo motor

[M3ZZA]

Hey guys i have been told that n/a rb30 injectors will work with the n/a ecu with a highcomp motor even with boost levels off above 10psi however.

One person claims that they have run there vl with n/a injectors and ecu and that the injectors run out off pressure or something like that after 7psi and that its unsafe to push them beyond 10psi unless you want to melt your pistons. Is that true ?

Another person i spoke too mentioned there mate runs 10 psi with no cooler with nothing more then vlt injectors and vlt ecu and that it can still do a mad dose ? is this guy full off s**t or is it really possible because i allways though that you need a intercooler to be able to run past 7psi and to use with a dose pipe.

Thanks.

[detox_nath83]

i am running 6 psi with my setup with intercooler, i have not tried any higher as i have heard of them maxing out at 7psi as well.
but i do have Turbo Injectors and Ecu here ready to go in.
with the right tune and so forth he might be running 10psi (timing/afr's etc/Right fuel)
Forget the dose really.(just a piece of pipe off the turbo compressor intake, so it amplifies the compressor surge)
Sacrificing the Air filter for a dose pipe it silly
U Can put a stocking over the pipe end.(or a Pod filter)