turbo

[swa145]

hey got a vl 6cly can i hook up a small turbo and run small boost to practicaly a stock rb30?

[detox_nath83]

This has been covered many times man please do a search.

And yes u can. Go the stock VLT setup remember it is a high compression setup though not a low compression setup so be smart about it.. can get it cheap as now off ebay, follow this thread as well on information Rb30e to Rb30et (Highcomp)
Goodluck.

[MR_VX]

many people run the standard turbo set up on the standard RB30 motor around the 8-10psi should be ok with a intercooler tho. But it also depens on how you drive. Just remember its a standard motor not a RB30T motor.

[weastyvsaero]

Can be done on low boost max 8psi. You can also buy decompression plates which will lower the compression

[weastyvsaero]

I have seen the decompression plates on ebay fairly cheap also

[nasty1]

days of decomp plates and 7th injectors are days of the past qouted from some one else here.

i wouldnt call stock setups cheap in excess of $1000+ for a full setup many people try palm of bitsa here bitsa there.


does any one know if n/a ecu and n/a injectors can be used?nackerz?i cant remember

[cracker]

search

8 psi max... your kidding yourself.

and yes decomp plates and extra injectors... leave those ideas where they belong, in the 1990's

but please search this has been done to death

[VL_5SPEED]

Yeh u can use n/a injectors/ecu on stock 6psi.

[detox_nath83]

Second that i been doing that for past 12 months

[VR_Acclaim]

I ran 10 threw a stock na en for 3 years with a fmic flogged it day n night n never killed it