My Vl - About To Modified

[vl_lightening]

this is my vl formula:

my plans are to:

1st gettin extractors, luckey exhaust with a 3" tip. fom carline. + K&N filter

then i might get 17" mags, or get the powdercoat shit of the calais wheels that the guy that i bought it off had done.

lower it

cold air


sound good?

let me no what you guys think.
Thanks,

Matt.

[VL Executive]

Get the Calais rims polished. They look nice highly polished. or if your getting 17's. VT, VX, VY, SS Commodore mags look very good too.

[Snowfox]

Sounds cool! A cheap way to improve the anchors would be some good Bendix brake pads. For cold air (depending on the setup) you may have to keep the air box and stick a new panel filter in it.

[Grantis1976]

Just try'n to save u afew bucks here !
Alot of guys race out and get a big exhust and muffler fitted to there n/a 3.0L.........save the money, and use it to buy a K&N panel. Stock exhust system is 2 1/4 inch....dont touch ! Instead of replacing the mufflers, just replace the rear muffler with 2 1/2 inch pipe.! Sounds shit-hot, not too loud, and more money for other stuff.
For cold air, use 3 inch pipe for a custom job! Straight down through the bottom of the air box, then point it straight towards the bumperbar!

Good Luck !!!

[vl_lightening]

thanks for that.

ok grantis, so i will then only have the front muffler and then straight through piping until the tip?what about resinator and hotdog and shit.

how much is a k&n filter by the way? thanks.

[niggle]

A k&n filter is about $100 give or take... thats perth prices atleast dunno about over east????????

Neil

[Grantis1976]

K&N will cost about $115 for a panel style.

The exhust system is stock, except for the missing rear muffler ( after diff ), which has been replaced with pipe.

Wouldnt know the diference, till u give it a rev, and she burbbles alittle on the way down. Not loud, just nice.!

[Bax]

Yeah I've got a sweet burble.

Could have gotten you a k&n panel filter for 5 bucks about..2 months back.

[DJ Majah]

Yeah I've got a sweet burble.

Could have gotten you a k&n panel filter for 5 bucks about..2 months back.

Can I ask how?

[vl_lightening]

thanks ay. im sorry that im a bit of a dead beat haha, so can i do this my self or what? does the rear muffler bolt on or what? do you have to get extra piping and weld it on.

and so how much is it to get the calais wheels sanded, and highly polished???

thanks again matt.

[Bax]

They were factory rejects, they were still all good, just had the rubber moulding coming in a little tiny bit more then normal.