window moulds
i have seen a few pics with vls with other moulds being used on the windows can enybody tell me which one to use and was it easy to install
Apprentice Panel Pusher
its not a vs/vr because the window went down in to the colw vent and had no bottom rubber where in this pic its got a bottom, i think it could be a rear window rubbers of a vs
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
Hey guys....I got moulds on my car and they make no noise what so ever... all though there is some sealent on the inside of the window... which i figure is because they dont fit exactly...?
They look heaps cool and i figure stopp or hinder the rust around the windows...(comparing to mates vl's).
<<<There's a good present
definately looks a lot tidier.
America just kicked in yo
A bloke was selling them on ebay a while back they are custom made for the VL and follow the vr/vs style they were around $60 if memory serves.
========My Statesman 20's Mafless and 3.9's========
Apprentice Panel Pusher
mk thats allright, dose the orignal glass fit or dose the edges have to b rounded off?
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
they use VT windsreen rubber fits straight in and looks pretty neat.....when i got my windscreen done i think they were gonna charge me an extra 32 dollars to do it
my brother has a vt will check it out thanks
does any modifications need to be done to the glass?
what modifications need to be done to fit this?
It is a universal rubber that they use.
You need to fill the two holes where the original moulds were.
When i brought my Vl, they had just replaced the front windscreen, however, when they replaced it they damaged the L shape plasitc cover on the drivers side of the windscreen, just covers up over the rubber, the one on the left is fine, any ideas where i could find one to go on the right side, as they are not all standard on all 86 models??????? Looks shit without it, and i dont like the idea of the rust
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
