Apprentice Panel Pusher
what LSD's will fit
i was wondering what LSD centres fit into the vl housing? i read somewhere that the skyline R31 will fit in and that the LSD was stock on there complete range, can any1 back this info up for me
and aparntly many ather centres of other cars fit,
found this on calaisturbo, very good walk though on how to lsd a open wheeler
http://www.calaisturbo.com.au/showth...+install+Spool
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
Banned
the only r31 that came with a stock lsd was the sillouette range!!!
Apprentice Panel Pusher
yah just lookd it up and found its in the shiToette and gts (stock)Originally Posted by SUSPECT
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
America just kicked in yo
Haven't fords got the borg warner as well? it is a borg warner we're talkin about isn't it?
========My Statesman 20's Mafless and 3.9's========
Apprentice Panel Pusher
yah vls had the borg warner diff, that rings a bell i remba reading the xf diff fits into the vl diff,
im intressed into what lsd centres fit in coz im able to go to the local wreakers ( u pull it ) and have a look at 2000+ cars which could possible hold a lsd that would fit
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
<<<There's a good present
how much would an LSD centre cost?
Apprentice Panel Pusher
cant see it costing any more then 40bucks at the wreakers (guessn), plus your 1 buck entry fee
im talkn about u pull it a self service wreakers down here in adelaide, price could very to ur wreakers
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
<<<There's a good present
a guy i work withs brother runs a wreckers so i'll call him up. the diff, axle upgrade and disc brakes and my rear end will be complete.
Banned
some how i think u would b lookin at a bit more than that!!! more like 200$ to 1500$ or so.... plus u want a lsd that doesnt need a recon (so im told that really expensive)
just realised were only talkin bout the center so i would have no idea
snowballing
who knows but im thinking 5 spd plus Lsd = Farking sideways
[SIGPIC][/SIGPIC]
its gonna cost ya a bit more than that mate...
I've seen LSD's on ebay go for $650+ ... you won't pay that much at u pull it but it'lll be a couple hundy at least i reckon.
Driving a CURSED WH V6.
America just kicked in yo
yeah you gotta look for a diff where both wheels spin the same way, if they spin the opposite way to each other its a single.
========My Statesman 20's Mafless and 3.9's========
Banned
just get 28 spline axel's and a mini spool could b down for under 400$
Yo Coooornflake!
search on ebay coz last night i saw a VL LSD centre for $99....not sure if its got any bids on it or when the auction finishes so check it out.
VK Wagz 308 - [Buildup Thread]
VK Wagz 253 Twin Turbo - [Buildup Thread]
VK Wagz EFI 5.0L 5spd - [Buildup Thread]
TECH: VK EFI Conversion - Fix your dead EFI 5L ignition module - Trimatic shift kit
Apprentice Panel Pusher
i know this is dodgy but the fences at u pull it arnt that high if they want a arm and a leg, or i could say its a crown wheel of a pintara...LOL
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
