rb25 boxes will bolt straight upto the rb30? what boxes are available for the rb30?
ive got a r32 skyline 5spd on mine, not sure what motor was coneccted to it think it was the rb25 but from what my mechanic said its straghit swap and anybox will practical fit u jsut need the right bellhousing and braket/crossmember to hold the box up
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
r32 boxes are basically the same as the mf5 - n/a 5speed, generally not too much difference although they do seem quite strong.
r33 5 speeds will bolt up to the rb30 with the old manual gear, only changes are tailshaft yolk, and the master/ slave cylinders need to be adapted, along with a speedo drive sender needs to be changed.
any rb gearbox should bolt up without too much hassle
what you mean basicly the same? would there be any diffrence in the gear ratios or stuff like that or is it just the layout of the houseing?Originally Posted by Bax
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
Not quite sure on what the gear ratio's are like.
I'm speaking in terms of strength, they are basically the same.
i think the lower gears are taller.
well in second gear i can get 130ks (r32 5speed), how tall would the stock 5speed get in second
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
it also depends on your diff ratio. but if diffs are the same i figure the rb30 box could be up to 20km/hr less than yours.
if the box is taller then wouldnt that mean it will be slower at take offs? like diffs ratios
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
yeah probably not as quick on the initial takeoff but you'd get 70km/hr out of 1st.
My old stocko would get around 120, but give and take a fair bit because speedo's vary and so do rev's apparently.
yah i can get the 70ks out of my first gear, so if i was to change the diff ratio to say 3.9 or 4.11 that would make the car run equivelant to a stock vl 5spd with 3.45 gears ?Originally Posted by bangers
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above