from where and how much?
mines miss firing just as it gets to under normall operating temp so thus y im asking
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
there are 2 of them
i for the ecu and the other for the temp gauge, both from a holden dealer for about $30 each
maybe non genuine from elsewhere cheaper perhaps?
if the ecu one quits, then the engine always thinks its cold and uses more fuel
the one on top of the thermostat, thats the ecu one right?Originally Posted by harry3
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
i have a new one if ya need one? well it was in my car for 2 weeks then i wrecked it lol. cost 50 id take alot less tho.
j_ack land @ aapt. net. au (removes spaces)
I cant remember which is which but there will be no engine temp gauge reading with that wire off
beware of hot water spurting out if removed with engine hot
would any1 be able to post up a pic off the ecu temp sensor as im not possitive which it is.
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
the ecu temp sensor is the one with the two pin plug, the gauge is the single wire.
ah fancy that, i got 1 today it was brand new almost, sat in wreaked vl at u pull it. went to pay for it and the dude said nah just go. u paid a buck to get in so u my as well take it 4 free.Originally Posted by SMOKN_LJ
runs fine as now, didnt have to drain teh radiato just quickly unscrewd got my dad to plug the hole with his finger then quickly removed it and screwd the new 1 on. only lost about 20ml of coolant so shit all really
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
And now that u did that, what change did it make??Originally Posted by VL Berlina 5speed
Also which 1 is which??
I was confused now I'm just not so sure!!
RIP Peter (perfect) Brock....
well the car is runnign alot smoother now b4 it was missfire when it got to operating temp (half way on the temp guage) and really had problems accelrating under load between 1500rpm to 2200rpmOriginally Posted by mag
dont know about fuel usage as off yet
but it was drinking a fair bit over recent weeks that its got worse
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above