Making Fibreglass Body Kits....

[VQXTC]

Hey there, has anyone ever made there own bodykit before??? I am after something different and seeing as i have experience with fibreglass i would like to give it a go....any help will be greatly appreciated....thanx

Lets work as a TEAM and do it MY WAY!!

[shady]

I brought my body kit, but i mixed and matched. I got the vl grp a front with vk grp 3 rear and side skirts. The only thing is I scrape all over the place where I live. I think if I was to make or alter anything, it would be the side skirts...perhaps give a bit more shape to them, apart from that I am happy with my choice. Have you checked out what the standard kits are like? Then consider altering them, I have never worked with fibreglass before but had some fun reshaping the side skirts to fit around the door moulds.

[253@7k]

Hey there, has anyone ever made there own bodykit before??? I am after something different and seeing as i have experience with fibreglass i would like to give it a go....any help will be greatly appreciated....thanx

Lets work as a TEAM and do it MY WAY!!

You want to make it from scratch?

[VQXTC]

You want to make it from scratch?

Hey there slundy, Yes I do want to make it from scratch, I dont want to follow what everyone else has done...

At least that way I can make it to what I want it to be

I am going to start on the sideskirts this weekend, I have a few ideas so I will give them a go and see what happens....


Lets work as a TEAM and do it MY WAY!!

[253@7k]

Ok, the first thing to do is get some old skirts to modifiy.

Cut, chop and add to these (use wood and bog) to get what you want then

take a mould of them. (sand back with wet and dry, clean, release agent

then gel coat and then glass over. You probably all ready know that but its

good to clarifiy) Then make your skirts with the mould and bobs your uncle.

Just ask if you want anything clarifiying. BTW, what f/glass work did you do?

[VQXTC]

Ok, the first thing to do is get some old skirts to modifiy.

Cut, chop and add to these (use wood and bog) to get what you want then

take a mould of them. (sand back with wet and dry, clean, release agent

then gel coat and then glass over. You probably all ready know that but its

good to clarifiy) Then make your skirts with the mould and bobs your uncle.

Just ask if you want anything clarifiying. BTW, what f/glass work did you do?

Hey there slundy,

Thanx for the advice I will see how i go this weekend, I have tomorrow off so hopefully can have a basic shape of what i want by the end of the weekend....

I have had experience with fibreglass through various car audio installations that i have undertaken......the only pics i have are of some door pods that i done just recently for an N14 Pulsar SSS.

I ended up getting them painted the same colour as the car......


Anyway I will let u know how i go.....cheers


Lets work as a TEAM and do it MY WAY!!

[stahlzy]

I'm in the process of doing a custom bodykit from scratch myself. I drive a 1984 Corolla and they obviously don't have anything bodykit wise on the market for them. When I'm finished building the twincam engine it should be good for 14-15's so wouldn't mind it looking pretty too. I'm still on the rear wing but I'll give you the link...

http://www.rollaclub.com/board/index...pic=7677&st=30

I have no fibreglassing experience but will probably learn to be able to finish this.

What's your location?

[stahlzy]

OOps, go to my last post on page 4

Shows you where I got up to yesterday.

[craigvl038]

hey good luck with the kit keep us up to date with what you do
also i was wondering where i could get some fiberglass from as im going to do a custom dash and i dont know where i can buy fiberglass
thanks

[VQXTC]

hey good luck with the kit keep us up to date with what you do
also i was wondering where i could get some fiberglass from as im going to do a custom dash and i dont know where i can buy fiberglass
thanks

Hey there craig,

I would say a manufacturer of fibreglass products would be your cheapest and best bet. Try your local phone book and see how u go.....hope this helps....
I will keep you all up to date as to how i go with the kit....as i work full time and have kids i dont have much time to work on it, so progress will be slow unfortunately....but I will get there...


Lets work as a TEAM and do it MY WAY!!

[VQXTC]

I'm in the process of doing a custom bodykit from scratch myself. I drive a 1984 Corolla and they obviously don't have anything bodykit wise on the market for them. When I'm finished building the twincam engine it should be good for 14-15's so wouldn't mind it looking pretty too. I'm still on the rear wing but I'll give you the link...

http://www.rollaclub.com/board/index...pic=7677&st=30

I have no fibreglassing experience but will probably learn to be able to finish this.

Hey there stahlzy,

Its good to see I am not the only one crazy enough to attempt a body kit....

Your wing is coming along nicely Well done!!

I cant see any other way to do it, so yes you will have to learn fibreglassing, but its not that hard just need to have patience and practice.....
If you want my location then PM me and i will give it to you.....cheers

Lets work as a TEAM and do it MY WAY!!

[id1kits]

Hey there, has anyone ever made there own bodykit before??? I am after something different and seeing as i have experience with fibreglass i would like to give it a go....any help will be greatly appreciated....thanx

Lets work as a TEAM and do it MY WAY!!

hey,
im thinking of starting a bodykit business and am looking to start on somthing without commitment, im a boatbuilder and have experience in carbon fibre, wet out machines (not that i think we would need one) and resin infusion techniques.
new on here so not sure of all the details but im in south auckland, where are you?

[id1kits]

hey good luck with the kit keep us up to date with what you do
also i was wondering where i could get some fiberglass from as im going to do a custom dash and i dont know where i can buy fiberglass
thanks

hey id1kits here, nuplex industries and hi modulous, keep us intouch with details

[GAMBLR]

3 year old thread bud...

[KoolKustoms]

under 600 bux on ebay you can buy a kit now , any day of the week
whoever wants to start a bodykit buissness these days out of fibreglass, needs to learn maths
unless they want to make nothing