Rear de-mister

[Stewart1000]

The rear demister on my VL series 2 wont work at all, i hit the button on the dash and nothing.

I'm not sure if this is how its meant to be but... say i have the head lights on, the demister light will be on, and if i then push the demister button it will stay on but it will be brighter.

Another little problem i am having is that the accelerator is quite hard to push in, well not really hard but it could be easier. Is that mine or are all VL's like this? i have narrowed it down to the tbody, the linkages are all free and not tight. the pedal spring is not too tight.

Greatly appreciated
Thanks in advance Stewart

[bangers]

the demister light is right. its meant to come on with the headlights and brighter when you push the button.

try WD40 on the linkages to free up the accelerator.

[Stewart1000]

yeah I tried wd40, heaps of it and cleaned the spring, but its still tight, i think it might be a new spring sprung too tight o9r somethign alogn the lines of that. any ideas? i Removed the front bumper and found out it needs a near rad support panel but i don't know how to remove that either, it seems to be stuck to the chassis... any ideas on that either?

Thanks Stewart