dizzy heads cant be swapped

[harry3]

according to a spare parts bloke, the dizzy head for the skyline and VL nissan motors arent interchangable \they look the same but wont fit, confirmed by nissan, he said

bosch supply a VL head, but it seems the genuine nissan part is all thats available for the skyline at over $100, ned kelly still lives on.....

[VL Berlina 5speed]

yes when i was looking for a new CAS, stoped at nissan and they asked what type i had, there was bosch(holden) and mitisubisi(nissain) these were just for the CAS, they nissan place wated 270 bucks for the CAS by its self if i recall correct,
and when i bought a new dizzy cap and rotor i was asked bosch or mitisbusi, i was qlue less untill he explained, mitis was nissan and bosch was holden

[mag]

yes when i was looking for a new CAS, stoped at nissan and they asked what type i had, there was bosch(holden) and mitisubisi(nissain) these were just for the CAS, they nissan place wated 270 bucks for the CAS by its self if i recall correct,
and when i bought a new dizzy cap and rotor i was asked bosch or mitisbusi, i was qlue less untill he explained, mitis was nissan and bosch was holden

Sean ur being told crap, Vl 3lt have HITACHI ignitions thats it, pt number is GH618 is for a dizzy cap and the letter H in that pt number means H is for Hitachi..

NISSAN Skyline RB30E also uses HITACHI same pt number and same info as above..

Nearly all Nissan stuff has Hitachi ignition systems, only 1 or 2 models use different brands..

[VL Berlina 5speed]

well from a post before in another thread i made about misfiring, i posted this

yah the nissain dude asked me what brand was my dissy and i said hatasi ( the commodores dissy) and then he told me the price,
i asked what was the diffreance between the two brands and all i was told is that the skyline used a dissy made by mitsibishi and the commie used the hatasi type, so tahts proberly why he wanted 235bucks

I think the nissan dudes iron mask makes him tell fibs too as Both nissan and Commodore RB30E both had Hitachi dizzy's ..
And check that ur new dizzy cap's part number is GH 618 and the rotor button is GH 619, both the same 4 nissan 3.0 lt..

the rotary button is, GH619 and the dissy cap is GH618
so it is the same numbers as u stated

yah when i bought them to at ricebahn the dude asked what type of dissy i had, i said the hatahi and he got the dissy cap out and showed me, looked exatly the same,
the mitsibishi cap had some wierd extra moulded bump on the cap, and then it was i found out by 'the iron masked man' (nissan dude)that apparntly the holdens had the hatahi and the nissan used the mitsibishi

ill look it up as im intressted to know,

yah i got the brands wrong but nissan and autobahn both said there was a diffrance, and as i said there was a extra moulded bump on it, so i dont know

[mag]

well from a post before in another thread i made about misfiring, i posted this







yah i got the brands wrong but nissan and autobahn both said there was a diffrance, and as i said there was a extra moulded bump on it, so i dont know

Have a look you're self..

[VL Berlina 5speed]

ah well that says alot, then what would be the diffrance with the caps and the hump on it? that i saw

[mag]

ah well that says alot, then what would be the diffrance with the caps and the hump on it? that i saw

All I can think of was he was showing you the wrong cap from another make..
Without a pt number 4 it or pic of it I don't know what they showed you, I'll look to see if I can find a pic like u said and post a pic of it...

[mag]

All I can think of was he was showing you the wrong cap from a another make..
Without a pt number 4 it or pic of it I don't know what they showed you, I'll look to see if I can find a pic like u said and post a pic of it...

How about this 1 ??? look 4 the pic with no pt num or what it fits..

[ThongyVL]

according to a spare parts bloke, the dizzy head for the skyline and VL nissan motors arent interchangable \they look the same but wont fit, confirmed by nissan, he said

bosch supply a VL head, but it seems the genuine nissan part is all thats available for the skyline at over $100, ned kelly still lives on.....

Hey mate if you want a Genuine Dizzy Cap GH618 I can supply you one for $25.00.

[Tree cutter]

When the CAS died on my VL i went to the wreckers and got another distributor which was off a SKYLINE. The distributor fitted and the holden distributor cap fitted, but the rotor button would not. The shaft on the nissan distributor is slightly thicker so the holden rotor button will not fit. When the CAS died on the SKYLINE distributor i decided to buy a new CAS to put in my old distributor and was told that nissan and holden CAS are different and the SKYLINE one costs about three times as much as the HOLDEN one so i bought the HOLDEN one.