Results 1 to 4 of 4

Thread: Transmission issues?

  1. #1
    Ride
    VL Calais

    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    15

    Default Transmission issues?

    hi guys,

    My 1986 VL Calais was stolen a couple of months back and thankfully was recovered in almost 1 piece....I've spent a fair bit of time and money 'putting it back togethor'. For the purpose of this post, its an auto.

    However, ever since I've had it back, it fails to drop (change) into top gear, meaning that it revs at slightly over 2000rpm @ 80km/h. It definately still changes into overdrive once warm but refuses to 'change up' (or lower the revs) any further.

    I only ask because i know that it used to register 2000rpm @ 100km/h and am naturally worried that this may cause unnecessary engine wear, especially if travelling interstate, not to mention less than ideal fuel consumption!

    Thanks for your time,
    joel
    Last edited by Flak; 30-10-2006 at 09:27 PM.

  2. #2
    Ride
    VL 86 RB30 Executive Auto

    Join Date
    Jun 2005
    Location
    South OZ Adelaide
    Posts
    813

    Arrow

    Quote Originally Posted by Flak View Post
    hi guys,

    My 1986 VL Calais was stolen a couple of months back and thankfully was recovered in almost 1 piece....I've spent a fair bit of time and money 'putting it back togethor'. For the purpose of this post, its an auto.

    However, ever since I've had it back, it fails to drop (change) into top gear, meaning that it revs at slightly over 2000rpm @ 80km/h. It definately still changes into overdrive once warm but refuses to 'change up' (or lower the revs) any further.

    I only ask because i know that it used to register 2000rpm @ 100km/h and am naturally worried that this may cause unnecessary engine wear, especially if travelling interstate, not to mention less than ideal fuel consumption!

    Thanks for your time,
    joel
    There's 2 changes that happens, 1 is the converter locks(to improve mileage) and the other is an electric overdrive cuts in to drop rpm.
    I'm guessing that the lock up convert is working but not the overdrive as the revs would other wise drop..
    Could be a plug or wire off ect..
    I was confused now I'm just not so sure!!

    RIP Peter (perfect) Brock....

  3. #3
    Ride
    VL Calais

    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    15

  4. #4
    Ride
    VL 86 RB30 Executive Auto

    Join Date
    Jun 2005
    Location
    South OZ Adelaide
    Posts
    813

    Arrow

    Quote Originally Posted by Flak View Post
    Thanks Mag, appreciate it mate. Will have to look into it.
    Took note in my car today, 80kph=2000rpm in pwr mode.
    Torque converter not locked and overdrive not on..
    I was confused now I'm just not so sure!!

    RIP Peter (perfect) Brock....

Similar Threads

  1. VR Transmission Issues
    By nolim8ts in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 11
    Last Post: 02-04-2007, 09:58 PM
  2. VN tow bar issues
    By timmy_tam in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 5
    Last Post: 13-02-2007, 10:30 PM
  3. Code 68 - Transmission Component Slipping - Auto Transmission Only
    By tysons_2001 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 0
    Last Post: 13-12-2006, 05:14 PM
  4. issues
    By Garth in forum Site Feedback / Site Problems
    Replies: 3
    Last Post: 22-07-2005, 06:18 AM
  5. Oil issues ls1
    By DazVYSS in forum VY Holden Commodore (2002 - 2004)
    Replies: 1
    Last Post: 21-05-2005, 07:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72