ive had my vl for bit under a year now and i have had to replace the distributor 3 times now! is there something more major with wrong with my car that is making the distributors break???
hey kevo wats crackin? did the cream vl's one sh1t itself too? well that sucks i have no idea what is wrong... that dizzy served me well for 3 years... maybe get a brand new one and see if it lasts, if not call an auto elec...charlies auto elec in town can help ya out
Going where no late model stato/caprice has gone before.... GAME ON!!
is it new ones ur replacing it with or second hand?
or are u placing in a new CAS in all of them?
if u are replacing teh CAS are u also replacing the Dissy bearings? as when this is stuffed it sets off a orange dust and causes the CAS to stuff up, its reckomened to do the bearings at the same time as the CAS as its most likly the culprut, and its avalible in a kit i believe
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
nah he's been replacing the whole dizzy setup but with second hand ones... like i said get a decent NEW one and see how it goes
Going where no late model stato/caprice has gone before.... GAME ON!!
new CAS can be bought from site below for 80 bucks, look in other products
http://www.injectorsonline.com/
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
you should never have to replace the whole distributor. do the bearing, cas, and plug for the cas, maybe the rotor button and cap and you should be sweet.
Yep, same, clean out the dizzy, pull the whole uckin thing apart get rid of all the dust and shit replace the $6 bearing make sure the shaft isn't worn and for god sake replace the gasket on the dizzy cap!
And stop cleanin ya engine with water especially if the gasket in the dizzy is ****ed.
ha ha dont worry i have never cleaned my motor lol. to scred to wet it coz something else will probly go wrong with the electrics. yer wel walsey ur one shit itself ages ago lol. got a new air flow meter from dale the other day car is running slow again!! ah i need to advance the timing and tune it so its how it used to be.