rb30 head bolts?

[ImAHoon!]

hey, are these a standard bolt head, or are they like an allen key? And what size. Thanks!

[jatsvl]

standard bolt head and 13 or 14mm from memory or 17 one of the three

[moff_man]

there a 8 or 10 mm allian head bolt from the 3 i stripped down

[VN_Luke]

10mm allen key head

[ImAHoon!]

great, so now I gotta source an allen key bit thingo for a 1/2 or 3/8th ratchet before everywhere closes for christmas...

hmmm!

[VN_Luke]

get a 10mm allen key, cut a bit off it with the hacksaw, then loc-tite it into a 10mm hex socket with a 1/2" drive (cause that's what your torque wrench will ahve when you go back to do them up )

[ImAHoon!]

get a 10mm allen key, cut a bit off it with the hacksaw, then loc-tite it into a 10mm hex socket with a 1/2" drive (cause that's what your torque wrench will ahve when you go back to do them up )

my torque wrench is 3/8th

I'll be going to supercheap auto tonight and seeing what I can find.

its only torqued to 65 foot pounds, so 3/8th is big enough, and I can probably get away with a cheap 10mm socket (I hope )

[jatsvl]

yes they are right, 10mm hex/allen. I went and checked,
I also looked at the bolts from a head I removed and sold two months ago they were standard head 14mm obviously imprevised replacements.