UHHHhhhh OHHHHHHHHHHhhhhhhhhh!!!!
Was driving home the other night and highbeam stopped working. Low beam is still working fine but high has just stopped working. I know its not globes because neither side will work on high beam. Where should i be looking?
soon to be boosted
Apprentice Panel Pusher
check the fuse box in the engine bay
general the left side will melt and cause probs
i beleive the headlight fuse is near that end, proberly melted and not contacting properly
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
soon to be boosted
Its in a VL wagon. When its on High beam the lights are very dull but there is still something there. Would that happen if it was the fuse?
Apprentice Panel Pusher
could happen if the fuse is only partial making contact i suppose
deff pop the lid and look at it, you should see its all melted.
grab some pliers and pull the fuse out and replace it if you can
have you cahnged the globes for any new ones? which are more brighter, longer whiter etc??
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
everything is standard as far as i know.
Apprentice Panel Pusher
do you drive with you full beam on alot? at night
this can cause to much draw on the circit and cause over heating on the rail,
your best bet is to check the fuse box/rail first, if its not there try the indercator stalk/light switch, ive had the light switch break its connection on one of my vls before
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
My workin on the car face
hahah ive had a worse time with lights. Doing silly buisness in my old VN on a dirt road about 10km away from my house and it was pitch black. I had my hi beams on BAM they went off, we were like 'meh'. So i use my lows for a total of 2 seconds and BAM they are gone too....
I had nothing in the middle of this dirt road at 12pm. Sooooo me and my friend (who was in the car with me) just flicked on the hazard lights and used them to light the road. We made police car noises allll the way home
BUT to help with the thread, a fuse actually melted into the fuse box so i had to drop another one in. Pretty annoying, the hi's kept on dropping out but the Lo's worked fine
Originally Posted by <TVR-161>
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote