As the title says, anybody know how to take this out, one side has a crack i wanna super glue lol, it the piece that sits behind the quarter glass and has the sealt belt come up through it.. i can post a pic if ive lost anybody..
It has 1 plastic plug thing init, but im not sure if thats the only one, its fragile 4 sure..
Thanks![]()
Yeah yeah I think I know the part ur talking bout, the plug is at the front of it down the side of the seat? This sounds a bit dodgy but it is probably what I would do. If you have an auto wreckers where you are that lets you go in and take parts off a car yourself i'd go there and ask if you can have one and get it off yourself. When you figure out how it comes off just take it as a spare. Saves breaking your own trying to work it out and should only cost $5 at the most.![]()
ill get a pic up for you later tonight
will show you the clips on the inside edge
there not too hard to take appart just dont get impaitent and start yanking as they are brittle
if you have any questions on moulds or parts which your stuck with dont be affraid to pm me Goon
im putting mine back together now and ive got all the moulds/chromes and trims pritty sused
just wait till you try the handles - you will get angry with them :P
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
ill just get a pic now
just wait 15 and it will be up
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above
the little square cut outs in the padding have clips into the pillar, ither slide it off the clips and leave them in the pillar or using a clip removal tool remove the clips
My Rides
Project VEE EL
On the Build.... Full respray, Smooth bay, Clean motor, Turbo, Suspension, Brakes
Click on the link and tell me what you reckon.
Yamaha YZ250F
My 'other ride'
VY Ute daily.......Dumped on 18s
The Aussie PackMule
___________________________________________
SA JustCommodore Section
For Events and Local Stuff Click The Link Above