Spark problems

[GryWgn]

Hey guys, recently my car is playing funny buggers, now im thinking this is going to turn out to be a major problem, but it might not be.. so this is whats going on... it does not spark on cylinder 2 and 4 i think anyhow any ideas on why it is sparking on some and not the others, it starts and all but running on few cylinders, im boggled, and its a vl not the vx as i sold it:P

[VPplayer]

first check your spark plugs, then your leads and then your coils. they are the main things to get spark

[detox_nath83]

do u know for sure it is not sparking on those cylinders mentioned
does it run any different if u unplug one ?
As VnPlayer mention Spark Plug/Leads and coil.
Others could be CAS disk is diry/debris in the slots for the LED sensor not to work
Check my thread on "Step By Step guide in changing CAS" to locate Disk

[GryWgn]

yes when i unplug the leads from the dizzy the motor doesnt change beats, and doesnt spark from lead to dizzy as im sure u would know, i will go buy coil and a 2nd dizzy and try them both see if i can pinpoint the malfunction

[detox_nath83]

hows the inside of the dizzy cup look....and rotor arm contact
any broken contacts pitted/corroded. i doubt it would be coil as it is working for others.
goodluck let us know

[Goon]

check ur timing too, i was running 5 when i first got my baby.. did that replaced the dizzy and cas and now shes fine..

[GryWgn]

i replaced dizzy now working fine cheers for input , now my low beams wont work, grrrrr(see other thread in electrical)

[detox_nath83]

possible contact in indicator stalk faulty
Relays in fuse box and fuses. Fuse rail melts common problem. If it has just bypass it for temporary and wire up a new fuse/holder when u can
goodluck