hey just curious, whats widest i can legally have my rear wheels?
depends what inch rims u got
As above - it depends how wide your rims are
http://shoppingsecure.com.au/ - JC's Rep
PM me or email philthy@shoppingsecure.com.au for all your stereo needs
okayyy, if i were to get centerlines, how wide could the rims be?
When you are looking at rims, you will see that they say "17x8", or "15x7" (examples). The first number is the tyre diameter, and the wecond is the width (in inches). So obviously, the wider the rim the wider the tyres you will be able to fit on them.
When you get wider than *about* 235 or 245 depending on your ride height, you will have troubles with the tyres rubbing on the guards, but with enough money there are ways around almost anything
http://shoppingsecure.com.au/ - JC's Rep
PM me or email philthy@shoppingsecure.com.au for all your stereo needs
Also LEGALLY the front and rear tyre widths must be in a tolerance of us each, from memory its 20mm, but I could be wrong.
Meaning the rear tyres cant be more then 20mm? wider then the front ones, would be a very bastard thing to get done for unless its an insane difference or an "attitude ticket".
ohk, well yeah the centerlines i want are 15x10s or 9s or 8s id rather the 10s, but might go the 9's and make the front the same :/ thanks![]()
If you are talking legality wise, then you are only allowed to have the specified tyres and rims as stated on the tyre placard which is located either in the glovebox or on the drivers door pillar. Not many people follow the placard tyre size recommendation, because if they did, then 90% of the modified cars driving around would be deemed unroadworthy. Exactly whether its an offence to use any other size to what the tyre placard recommends Im not certain 100%.
RTA Information
http://www.rta.nsw.gov.au/registrati...vsi09_rev4.pdf
If you're thinking about 275s, I guarantee you'll need to get those arches tubbed![]()
__________________________________________________
The 1972 HQ Kingswood
The 1989 VN Turbo Rally Project
__________________________________________________
i've heard of it before, but what exactly does "tubbed" mean?
chopping up the wheel arches of your car, to make them deeper. Often associated with shorter axles to run wheels with big dish![]()
__________________________________________________
The 1972 HQ Kingswood
The 1989 VN Turbo Rally Project
__________________________________________________
if you havent got a tubbed vn im pretty sure the widest tire you can fit without rubbing is 235