Results 1 to 22 of 22

Thread: vp memcal problem

  1. #1
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default vp memcal problem

    hi i have just installed one of them sv3800 chip for my vp v6 and my idle seems to be to high and the check engine light stays on, and when i put it in low and put my foot down the tranny starts to slip , could it be my dodgy installation or could it be a bad chip? got me buggered can someone give me advice?

  2. #2
    Ride
    VP Executive R-spec

    Join Date
    Jan 2005
    Posts
    7,910

  3. #3
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    yeh i might of not soldered the contacts properly, would that also effect the transmission been a vp there not electronic are they ?

  4. #4
    Ride
    VP Executive R-spec

    Join Date
    Jan 2005
    Posts
    7,910

    Default

    nah it wont change the gearbox but what you described is limp mode and it will run like that but have no power. Just check all the contacts untill you get it right and it'll work

  5. #5
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

  6. #6
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    if the fan comes on when you turn the ignition on its definately limp home mode.like foam says 9/10 times its the soldering or someones put the chip round the wrong way or not reset the ecu
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  7. #7
    Cobez's Avatar
    Cobez is offline LS-EXUAL
    Ride
    2004 S2 VY SS Ute

    Join Date
    Feb 2007
    Posts
    3,095

    Default

    Ebay memcal?
    Quote Originally Posted by wikky
    As already stated, mate you're an absolute gherkin strummer.

  8. #8
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    yeh its in limp mode fan comes on when i turn on the ignition , yeh its one of them ebay jobs thought i give it a go and see what there all about ill pull it out this arv and double check my soldering, lucky i bought it cheap.

  9. #9
    Cobez's Avatar
    Cobez is offline LS-EXUAL
    Ride
    2004 S2 VY SS Ute

    Join Date
    Feb 2007
    Posts
    3,095

    Default

    Quote Originally Posted by wikky
    As already stated, mate you're an absolute gherkin strummer.

  10. #10
    woodywoodpeckerin02 is offline Get An ECOTEC Turbo Up Ya
    Ride
    VK Calais 5.7

    Join Date
    May 2009
    Location
    the world
    Posts
    47

    Default

    with these chips thay will make more power BUT with over fuling the engine you will use more fuel and
    if you useit for a long time (2-3 months) it will start to where the rings and bores as all the extra fuel
    washes the oil off the bores but in saying this im using one in my skid car but the car doent do much
    more than do skids 2 a year

  11. #11
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    if you get a properly tuned one it wont over fuel at all most good performance tunes will save fuel in the end from the increase in torque and horsepower unless you drive round at WOT all day
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  12. #12
    Cobez's Avatar
    Cobez is offline LS-EXUAL
    Ride
    2004 S2 VY SS Ute

    Join Date
    Feb 2007
    Posts
    3,095

    Default

    Quote Originally Posted by woodywoodpeckerin02 View Post
    with these chips thay will make more power BUT with over fuling the engine you will use more fuel and
    if you useit for a long time (2-3 months) it will start to where the rings and bores as all the extra fuel
    washes the oil off the bores but in saying this im using one in my skid car but the car doent do much
    more than do skids 2 a year


    As Delco said above, get it properley tuned then, you will most likely have BETTER performance and not have gutloads of fuel dumped into your engine either.

    Not slagging off all Egay "tuners" but the majority of them are crap. PM Greenfoam, Delcowizzard or Doctor Bob, they will sort you out.
    Quote Originally Posted by wikky
    As already stated, mate you're an absolute gherkin strummer.

  13. #13
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    yeh i been reading up on Delcowizzids tunes im thinkn of getting from him , im still not sure if the tune i bought is bad but i know now my install is a bit dodgy to say the least and yeh im convinced now of getting one i can just plug in instead of soldering..

  14. #14
    Cobez's Avatar
    Cobez is offline LS-EXUAL
    Ride
    2004 S2 VY SS Ute

    Join Date
    Feb 2007
    Posts
    3,095

    Default

    More than likely mate, it's a shit tune. When i first got my old car (VP V6) about 4 years ago, i knew zero about tuning (still don't know HEAPS, but enough), bought a tune off Egay called an SV3800 tune.

    Car ran rich, guzzled fuel and really didn't run that great for a tune. Then got Foamy to do a tune, noticed the different immediately. Fuel economy was HEAPS better, and the throttle response was fantastic. Could not have complained one bit about his tune.

    Delcowizzard can do the same for you, haven't heard ONE bad thing about one of his tunes from anyone on this forum, all good things.

    You won't be dissapointed. Most of those Egay tunes aren't properley done, Delco and Foamy's tunes have had time spent on them smoothing out the kinks.
    Quote Originally Posted by wikky
    As already stated, mate you're an absolute gherkin strummer.

  15. #15
    woodywoodpeckerin02 is offline Get An ECOTEC Turbo Up Ya
    Ride
    VK Calais 5.7

    Join Date
    May 2009
    Location
    the world
    Posts
    47

    Default

    if there is one thing that i can say about cheap porfamance is that there is no such thing dont tight ass
    your way out of any thing you will pay for it in the long run
    eg i got a new trany i got the wrong shifter brackets i moded them and now the trany is dead no 3-4
    all because i didnt get the right gear

  16. #16
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    yeh so far the car has been good value for 800 bucks it ran pretty well before i stuffed around with the chip ,im sold on the idea of spending the extra getting a deceant one now.

  17. #17
    Ride
    VP Executive R-spec

    Join Date
    Jan 2005
    Posts
    7,910

    Default

    Quote Originally Posted by Cobez View Post

    You won't be dissapointed. Most of those Egay tunes aren't properley done, Delco and Foamy's tunes have had time spent on them smoothing out the kinks.
    I reckon I can name at least 3 guys on ebay that do good tunes tho (not including LS1 tuners) you forget I sell 95% of mine on ebay, it's by far the best way to sell something and all SV3800 tunes are straight copies of the factory HSV tunes, they use less fuel than the Holden version

  18. #18
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    im now running a delcowizzid tune in it and its far far better than what it was ,very impressed ,thanks fellas for steering me in the right direction.

  19. #19
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    haha good to see it arrived mate good gain over stock i bet no engine light is allways a bonus may have cost more than an ebay special but least it goes as expected MORE POWA glad i could be of assistance any issues you know where to find me .oh yeah i didnt bother replying to the pm im away tuning and havnt been on the net for a few days wont be on much for a week or so
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  20. #20
    Ride
    VP s2 3.8

    Join Date
    Aug 2009
    Location
    sydney
    Posts
    11

    Default

    yeh mate was money well spent , it arrived quicker than the one i got from ebay the other week and that was from the same state i live in , Yeh big difference now it feels like a new motor in it , i thought i was goin thru back tyres before i think ill be goin thru them alot quicker haha

  21. #21
    Ride
    VT Berlina Wags

    Join Date
    Aug 2009
    Location
    Bellarine Peninsula
    Posts
    287

    Default

    delcowizzid,can you make me a vp v6 chip for increased performance as i have never tried an ebay one and don't want to after reading all thisand all i want is the car to run well and a lot harder if possible,cheers mate and get back to me with details please.

  22. #22
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    give me a week to get back home im about 500km's away right now so cant do any tunes till i get home on tuesday will get in touch
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable


Similar Threads

  1. Memcal help!
    By lewis8805 in forum Tuning
    Replies: 2
    Last Post: 04-04-2009, 04:30 PM
  2. High torque or chip torque memcal for vr v6 4 sale: $150 ono plus standard memcal
    By Youngblood in forum Swap / Wanted to Buy / Trade
    Replies: 6
    Last Post: 22-05-2006, 06:28 PM
  3. High torque or chip torque memcal for vr v6 4 sale: $150 ono plus standard memcal
    By Youngblood in forum Parts And Other Items For Sale
    Replies: 0
    Last Post: 18-05-2006, 02:54 AM
  4. memcal socket install problem
    By CSL in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 12
    Last Post: 18-03-2006, 03:14 PM
  5. what memcal to use??? vn v8
    By Damian_w42 in forum V8 Development and Modification
    Replies: 19
    Last Post: 20-01-2006, 09:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72