superlow king springs

[kaneovp]

hey guys i just wanna know if anyone here haves got superlow king springs on ur cars if so i wanna know if the car steats just over the back trye as thats what i what my car to look like if anyone got pics with ur car riding on the superlow king springs plz show me

[CalaisJohn]

here ya go .. bare in mind rims are standard 15 inch and my boot is gutted - no spare, no carpet.. nothing, and these springs are only a month old so will prolly drop a tad more. Took a measure from centre of wheel to the guard's lip and figues out to 12.5 inches (front and rear interestingly enough) Load ur boot till u get to that level and that's what it should look like

[CalaisJohn]

oops! I made a mistake - these are SSL's NOT SL's

[Harey]

need quite low in the rear imo. I use ultra lows in the rear and only low in the front. with 18s the rear flat part sits just below the top of the tyre.

[Joey88]

Hey mate, I have super lows in the front and back of my VP, looks very similar to the pics that are posted above. I too, until recently, had the stock 15's on but I've replaced them with VY SS 17's.... depends what look you're after I guess.

[_R_J_K_]

Try looking in the "My Ride" section or use the search button, there are plenty of people here who have them.

[padrickz88]

Are you sure CalaisJohn? ultra lows have the code SL and superlows have HD...

Here is a pic of mine, fronts are superlows but rears are ultralows (and i have gas,sub,spare in my boot + usual crap)

So it would probably be a bit higher without all that crap, might not be what your looking for but its just something to throw out there

[CalaisJohn]

Hey mate, I have super lows in the front and back of my VP, looks very similar to the pics that are posted above. I too, until recently, had the stock 15's on but I've replaced them with VY SS 17's.... depends what look you're after I guess.

I'm looking for a good set of 17" clubsports - and the cash to throw at them


.. okay my curiosity was stirred so here's the p/no's of my springs..

front - KHFL22-SSL
rear - KHPR20-SL, and the king's catalogue defines this pairing as ultralow. Am giving my boot a spring clean so it's gutted but the rear does sit quite low with the twin sub's installed, spare tyre and 85 litres of fuel.

[_R_J_K_]

The amount of S's in the part name has no bearing on the ride height they provide. Check this thread out and read the posts made by Not_An_Abba_Fan and gslrallysport.
Lowest springs for a vr commodore

[padrickz88]

ahhhhh the ssl's were in the front, i got ya now.... yep looks like ultra's all round

[kaneovp]

nice guys for the help i went out and got superlows set up off ebay god i love ebay lol i put them it so far the fronts i like the back is just seats under the trye and iam happy with that but iam goin to give it 2 weeks and if they have not droped then i will get the ultra's

[CalaisJohn]

hey kaneovp if you're not too happy with the ride height in a few weeks PM me.. I may be interested in doing a swap

RJK, yep, it can get quite confusing with the amount of S's

[padrickz88]

give it more then 2 weeks man, give it like a month or 2.... just to make sure and to get used to it

[swiftymcfeat]

Don't waste your money, cut them...lol.

[markER717]

I have supa's allround and they just barely tuck on 15" calais wheels. .

[NOT.BT1]

i have ultras in the rear and supers in the front only problem i have is its scrubbing somewhere in the back and i cant figure out where any ideas guys? a mate thinks it may be a shagged centre bearing in the tailshaft or maybe a uni what do you guys think?

[padrickz88]

Don't waste your money, cut them...lol.

Don't listen to this guy, he should be kicked in the nuts

i have ultras in the rear and supers in the front only problem i have is its scrubbing somewhere in the back and i cant figure out where any ideas guys? a mate thinks it may be a shagged centre bearing in the tailshaft or maybe a uni what do you guys think?

Does it sound like a metal on metal sort of noise? and usually when you accelerate?

I had a problem with my tail shaft hitting the floor, so jack it up and give it a look

[Bz Kn33z]

If you cant be botherd jacking the car up, just take the bottom back seat out, and see the dint/slice in the floor.