VN Front Knock, Squell and Vibration HELP PLEASE

[Vr929]

Hi all i have a Vn commodore 1989 sedan i only recently replace my tie rod ends and after i replace them every time i turn a corner i hear a squeel from the front and i also have steering wheel vibration when i take off fast and also have a a knock when i reverse out a drive way on the drivers side recently replaced shocks but what im consender about is the squeel any ideas guys

[DrJeckyl]

Did you get a wheel alignment done?

[Vr929]

na mate no wheel alignment done would that be the problem as i also replaced me front shock about 2 weeks ago with the top bearings because it started asoon as i replaced me tie rod ends

[centy]

can i smack you in the head now?
you change shit on the front suspension then you get a wheel alignment, or you go buy a ford and i won't give a rats arse.

[Dum*P*ster]

Dont worry, easy mistake
Needless to say, i learnt the hard way to

[Vr929]

cheers fellas will ring up and get an alignment for saturday

[Vr929]

Hi All well i went to take it for a wheel alignment yesterday and the bloke said i need a new rack end on driver side tie rod end and Lower Control arm bushes, front and rear Radias Rod Rubbers i have put them all in and took it for a test drive around the block every time i put my foot on the brake i get a knock i was wandering if i have done something wrong or it needs a wheel alignment which is what i am doing tommorow or is there another problem is it because the rack end needs adjustment or something along the lines of that any help would be great

[darthdingas]

I have done the same as vr929 replaced everything the the front end down to the rack, struts, bearing and bushes i did get a wheel alignment day after work was done. the bloke said that it all looks great aligned well car drives sweet, let go of the wheel drives straight... now when i stand hard on the brake before a corner thats when i get a loud sinlge knock every time as the car dives down off the brake round the corner on the power and a small knock as the car straightens and levels. i didnt have this before the work was done i've gone all over everything i have done and it all looks good and tight... it's got me stumped