Vs C/C into VP Help

[iRiot]

hey guys i have been doing a vp - vs retro fit i have been following the other posts on this forum thank to markovr but i have a problem i cant get the cruise control to work so if anyone could help that would be great and a diagram would be fantastic

[levymetal]

You may need to run a VS trip computer in the dash. I put a VR trip computer in my VP and cruise didn't work so it's connected somehow, I'm sure greenvn knows more

[Not_An_Abba_Fan]

The trip computer has nothing to do with cruise.

Have you fitted the VS BCM?

[iRiot]

no i am using all original wiring i have been following this thread
VP to VS Dash Conversion

so far i have the lights, hazards, demister and everything else is in i just need to wire the C/c and Window washers
help would be great i know it can be done just need diagrams

[iRiot]

anyone got any daigrams or have done it?

[Not_An_Abba_Fan]

I'm sure that the C/C requires the BCM for it to work. It runs off wheel sensors that are used for the ABS as well.

[levymetal]

The trip computer has nothing to do with cruise.

i beg to differ, i put a vr trip computer in my vp and cruise control stopped working. i was scratching my head until i put the vp trip computer back in the dash and cruise worked again. shane tested it as well and he got the same problem - cruise won't work without the correct trip computer.

[Not_An_Abba_Fan]

I had a VS with factory cruise and it didn't have a trip computer.....

[iRiot]

all good got it working i just wired it so it is always on then all you need to do is press set dodgy yes but vp cant have a press switch it has to have a on/ off switch

[levymetal]

I had a VS with factory cruise and it didn't have a trip computer.....

that doesn't explain my problem though, maybe the VS loom works different, but he's using a VP loom (like my car) so i thought it might have something to do with that. looks like he got it working anyway though

all good got it working i just wired it so it is always on then all you need to do is press set dodgy yes but vp cant have a press switch it has to have a on/ off switch

my cruise control is always on anyway, i never turn it off

[Not_An_Abba_Fan]

The cruise signal goes throught the cluster on VN-VP, on the VR-VS it goes through the switch block, so that explains your problem.

[levymetal]

ah ok, well that makes sense then. thanks for that

[iRiot]

now the only problem i have is my instrument lights are not working anyone got a fix for that?