need help gearbox (auto)
as above
will a vp s2 gearbox (auto) fit a vr s2?
It will bolt up fine, but the VR had an electronically controlled box, whereas the VP didn't. To the VR ECU, it will appear as if there is no gearbox there.
o so how do i get around that?
You might be able to get it to work properly with a new memcal tune. I don't know if you could swap all of the loom and electronics from a VP or not. Other than that, not much.
dam.. any1 no how 2 make it work
use the vp memcal in the vr , have done this myself only recently with my brothers vr commodore. the vp runs hydralic servos and the vr runs electronic. the motors run the same tune but the vr is tuned to run the electronic box.
on holiday
no its doable but difficult youll loose torque convertor lockup and speedo without pulling both boxes to bits.you can run a vn ecu and wiring loom for the engine and then run the vn box but its just as easy to find a vr auto
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
im only askin beacuse i got a vp here that run's.. but i need the vr runnin so i can get all parts from the vp
Delcowizzid's answer will most likely be the definitive answer, it would be much easier just getting a VR auto.
yes i no that but when u r in a town where there is only 300 people its abit hard.
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote