Did I blow my ECU or just a fuse?

[92vpcom]

Hey,

Car info: 92 VP commodore V6 3.8l

So I've been having car problems recently (stalls whilst driving) and the engine light had been coming on, so I retrieved the code 12 by bridging the A - B ports on the ALDL connecter. So I left it cause all was ok.

Next day the engine light came on again and being over confident I went to retrieve the codes again and this time I stupidly bridged the wrong ports on the ALDL connector. I bridged the A and H (+12v) ports. Now when i turn key to ignition I have no dash lights (check engine, battery, park break e.t.c) and the engine won't start, it turns over but won't kick start.

Have I blown the whole ECU or possibly just a fuse?

Hope someone can give me the bad/good news!

[KnobMuffin]

Probably a fuse, take the cover under the steering wheel, above the foot well off and check all your fuses.

[92vpcom]

Probably a fuse, take the cover under the steering wheel, above the foot well off and check all your fuses.

THANKS SO MUCH! yep just a fuse, will replace and see if it's a goer! thanks again!